Painting trunk/tailpanel black

[FY1Cuda]

I already painted the trunk gutter the color of the body, but I want to know where the body color ends and the black from the tailpanel begins.  Anyone have any good pictures of this area?

[Alaskan_TA]

Cuda or Challenger? What year?

[FY1Cuda]

Cuda or Challenger? What year?

Oops, guess I should have specified.  '70 Cuda

[RUSTY Cuda]

Just did mine (well kinda it came out lousy), I guessed, used the double metal on the sides & I brought that across just inside the rear lip, just so when you close the trunk you can't see the line?
I can shoot a pic of the line tomorrow if you need, see if it's close to what the other guys post up. Rich.

[Alaskan_TA]

OK, on a 1970 Cuda the black out is contained inside the loop of chrome surrounding the tail lights. (the M88 option)

You can see the technical drawing for it at this link;

http://www.hamtramck-historical.com/images/engineeringDrawings/ei010.jpg

Barry

[RUSTY Cuda]

thanks barry, wish I had the trim, that line is hard to make without the trim to cover up my tape lines! Rich.

[Alaskan_TA]

Well, you car is not a '70 so the information does not apply for your year. The newer models did not have the same molding. 

Barry

[FY1Cuda]

OK, on a 1970 Cuda the black out is contained inside the loop of chrome surrounding the tail lights. (the M88 option)

You can see the technical drawing for it at this link;

http://www.hamtramck-historical.com/images/engineeringDrawings/ei010.jpg

Barry

So under the trunk lid, it should all be body colored then, correct?  

[Alaskan_TA]

Yes.

[RUSTY Cuda]

Ahh yes, looked at the diagram, my moulding should be(well if I had it) on the quarter panel & trunk lid!

[FY1Cuda]

Thanks!