Author Topic: Vinyl top install question  (Read 691 times)

Offline bnorth

  • Jr. Member
  • **
  • Posts: 83
Vinyl top install question
« on: January 01, 2007 - 06:30:14 PM »
Hello  and Happy New year to all, I have been busy the past few days on the car  :working:

  I am getting ready to paint my Challenger and will be installing a vinyl top.
My question is what is a better foundation for the vinyl top , the roof painted or just the final Sealer Coat before Paint ?
 Is one better than the other ?

thanks
Ben




Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: Vinyl top install question
« Reply #1 on: January 01, 2007 - 07:49:49 PM »
Who you getting the top from.?? Year one is $135.00
Dave or David

Offline bnorth

  • Jr. Member
  • **
  • Posts: 83
Re: Vinyl top install question
« Reply #2 on: January 01, 2007 - 07:54:37 PM »
I picked it up a while back when I was gathering parts, Ibeliee it was YR1 or the Paddock oneor the other.

I am not sure if it is better to glue it down to Paint or Primer Sealer.

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: Vinyl top install question
« Reply #3 on: January 01, 2007 - 08:06:53 PM »
I don't know either. Mine is primed right now. Waiting to see the answer to your question!!
Dave or David

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Vinyl top install question
« Reply #4 on: January 02, 2007 - 05:38:10 AM »
The factory didn't paint the entire roof when they were installed , but most people paint the whole roof when replacing one. I usually don't paint the entire roof when I do one. My main reason is because the glue doesn't like to adhere to fresh paint. The gasses from the reducer are still coming out for a period of time and cause the glue to detach.
  If you do paint the roof leave it set for a while and also lightly sand it to help the glue hold.
 Dave

Offline bnorth

  • Jr. Member
  • **
  • Posts: 83
Re: Vinyl top install question
« Reply #5 on: January 02, 2007 - 11:04:25 AM »
Makes sense , thanks
ben