Author Topic: Goodmark trunk panel  (Read 3562 times)

Offline HemiDog

  • Sr. Member
  • ****
  • Posts: 1384
  • Do not Assume!
    • Hemi Dog
Re: Goodmark trunk panel
« Reply #15 on: December 05, 2006 - 08:32:22 AM »
Seems like I have read that you can also get the one piece in if you are replacing a quarter panel.  Just slide it in through the side.  :dunno:




Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: Goodmark trunk panel
« Reply #16 on: December 06, 2006 - 02:55:47 PM »

Were is the best place to get these for price and shipping cost?


Do the full panels come with the ribbing on the gas tank side? I'm talking about the ribs the gas tank sits up against.
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Goodmark trunk panel
« Reply #17 on: December 06, 2006 - 05:31:20 PM »

Do the full panels come with the ribbing on the gas tank side? I'm talking about the ribs the gas tank sits up against.
No they have to be bought separately, I went ahead and bought them and they should be in tomorrow.

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Goodmark trunk panel
« Reply #18 on: December 06, 2006 - 05:37:41 PM »
Farmboy where did you order you panel from? How was the price and shipping if you don't mind me asking.   :clueless:

Offline Green Drop Top

  • Full Member
  • ***
  • Posts: 628
Re: Goodmark trunk panel
« Reply #19 on: December 06, 2006 - 05:40:08 PM »
Quote
How do you get the one-piece in the trunk without cutting out the whole rear end?
 
 
--------------------------------------------------------------------------------
I know of only one way to fit it and that means removing the tailpanel.I have read somewhere someone was claiming that they could get one in without removing the tailpanel,but I dont think you can.-----The Clown
 
 --------------------------------------------------------------------------------
Supposedly, one can get it in if they remove one of the trunk braces.
 
 

You can make this easier by doing something different. Simply buy the single piece trunk floor and measure over to the center of one frame rail (doesn't matter which side) then slice it into two pieces over the rail. That way once you weld it back together (over the frame rail void) you have a weld that is 100% hidden on the underside, all you have to weld and finish is the top. This is allot less work than removing a tail panel or a quarter panel just to install it in a single piece!

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Goodmark trunk panel
« Reply #20 on: December 06, 2006 - 07:05:02 PM »
Farmboy where did you order you panel from? How was the price and shipping if you don't mind me asking.   :clueless:

I got mine from Goodmark , shipping is hard say what just a pan would be as I ordered other parts at the same time.$99.00 for the entire order, the service and shipping time were excellent. I thought the price was good as the additional time to install the two piece more than made up for it in my opinion.
Dave

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Goodmark trunk panel
« Reply #21 on: December 07, 2006 - 04:51:41 PM »

Do the full panels come with the ribbing on the gas tank side? I'm talking about the ribs the gas tank sits up against.
Here are the tank mounts from Goodmark, they fit to the pan perfectly almost didn't need to clamp them to weld them.

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: Goodmark trunk panel
« Reply #22 on: December 07, 2006 - 07:17:28 PM »
That looks great

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Goodmark trunk panel
« Reply #23 on: December 08, 2006 - 01:51:24 PM »
Nice Job  :thumbsup: Thanks for the pics.

Offline bossrobot

  • Jr. Member
  • **
  • Posts: 37
Re: Goodmark trunk panel
« Reply #24 on: December 26, 2006 - 12:58:19 AM »
Who makes a good trunk extension ?
Thanks
Johnny

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Goodmark trunk panel
« Reply #25 on: December 26, 2006 - 05:44:59 AM »
Goodmark is working on new trunk extension panels but there aren't out yet. The current ones will fit with a little rework of the area that meets the wheel house.

Offline torredcuda

  • Sr. Resident
  • ******
  • Posts: 6218
  • Epping NH joined 11/23/03
Re: Goodmark trunk panel
« Reply #26 on: December 26, 2006 - 05:59:22 AM »
Are trunk gutters they same or different for a Barracuda?
Jeff
72 Barracuda 340/4spd  Torred
70 roadrunner 383/auto  In-Violet
70 Duster 360/auto drag car  (Petty Blue soon)
04 Ram 2500 5.7 Hemi

Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Goodmark trunk panel
« Reply #27 on: December 26, 2006 - 10:05:28 AM »
They list a part number for Challengers all years and a different one for Barracuda/Cuda 1970-1974.

Offline torredcuda

  • Sr. Resident
  • ******
  • Posts: 6218
  • Epping NH joined 11/23/03
Re: Goodmark trunk panel
« Reply #28 on: December 26, 2006 - 03:05:31 PM »
I figured they were different.
Jeff
72 Barracuda 340/4spd  Torred
70 roadrunner 383/auto  In-Violet
70 Duster 360/auto drag car  (Petty Blue soon)
04 Ram 2500 5.7 Hemi