Author Topic: Serpentine Belt Systems  (Read 4758 times)

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Serpentine Belt Systems
« Reply #15 on: December 24, 2006 - 05:22:06 PM »
I liked what I got!  They are pretty!  It was pretty simple and easy to install.  I had to get a couple different bolts as one in the kit was to short and another was too long.  Other than that . . . pretty slick!   :thumbsup:

4C,

  I gotta admit I have drooled on your engine a few times.  :misbehaving:  I'm guessing you did that installation while you had the engine out?  I'm wondering how much knuckle bruising it would take to do it on an installed engine, and would you recommend it? It definitely adds a "bling" factor.  :thumbsup:

   Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.




Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Serpentine Belt Systems
« Reply #16 on: December 24, 2006 - 06:25:40 PM »
Both styles look killer but if I were going to go through the trouble I think I would make it a true serpentine system, unless it just costs that much more.
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline Madmax440

  • Sr. Member
  • ****
  • Posts: 1471
Re: Serpentine Belt Systems
« Reply #17 on: December 24, 2006 - 09:21:51 PM »
This is the one that I seen from Billet Specialties -

Offline Madmax440

  • Sr. Member
  • ****
  • Posts: 1471
Re: Serpentine Belt Systems
« Reply #18 on: December 24, 2006 - 09:38:30 PM »
They also are able to replace the carbon fiber inserts with powder coated inserts the same color as your car or block - Could you imagine this one on MEKRunner's car or Rev's. When I saw this setup I got a semi.
 
« Last Edit: December 24, 2006 - 09:40:32 PM by Madmax440 »

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Serpentine Belt Systems
« Reply #19 on: December 24, 2006 - 09:58:06 PM »
 :money: :money:   
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Serpentine Belt Systems
« Reply #20 on: December 24, 2006 - 11:12:17 PM »
4C,

  I gotta admit I have drooled on your engine a few times.  :misbehaving:  I'm guessing you did that installation while you had the engine out?  I'm wondering how much knuckle bruising it would take to do it on an installed engine, and would you recommend it? It definitely adds a "bling" factor.  :thumbsup:

   Mike

Actually I did the system while in the car!  I didn't have a radiator installed though . . .

Offline 440_72cuda

  • Jr. Member
  • **
  • Posts: 228
Re: Serpentine Belt Systems
« Reply #21 on: December 25, 2006 - 10:23:58 PM »
I liked what I got!  They are pretty!  It was pretty simple and easy to install.  I had to get a couple different bolts as one in the kit was to short and another was too long.  Other than that . . . pretty slick!   :thumbsup:
hey 4C what color orange is that on that engine  :droolingbounce:

Offline cudabuyer

  • Sr. Member
  • ****
  • Posts: 1230
Re: Serpentine Belt Systems
« Reply #22 on: December 26, 2006 - 05:10:01 AM »
i installed the tru trac on my 540 hemi but in the car and out, much easier to do out of car, especially making sure everything is tight  :working:
70 Dodge Challenger Convertible 6.1 Hemi


Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Serpentine Belt Systems
« Reply #23 on: December 26, 2006 - 07:58:28 AM »
This is the one that I seen from Billet Specialties -
WOW!!!! :scared:  I am afraifd to ask how much that setup costs!  Is that the a/c compressor on the right side below the P/S pump?  Amazing!
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Serpentine Belt Systems
« Reply #24 on: December 26, 2006 - 10:53:29 AM »
hey 4C what color orange is that on that engine  :droolingbounce:


I believe it was street HEMI orange.  Mopar spray can.   :2thumbs:

Offline HemiDog

  • Sr. Member
  • ****
  • Posts: 1384
  • Do not Assume!
    • Hemi Dog
Re: Serpentine Belt Systems
« Reply #25 on: December 27, 2006 - 06:34:27 AM »
WOW!!!! :scared:  I am afraid to ask how much that setup costs!  Is that the a/c compressor on the right side below the P/S pump?  Amazing!

The Billet Specialties setup with the A/C compressor, locates it on the upper right (passenger side) of the motor.  On the left you have the alternator on top with a mini PS pump below it.  The the A/C compressor has a chrome plated manifold that wraps around the pump and routes the A/C lines down away from the top of the motor.

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Serpentine Belt Systems
« Reply #26 on: December 27, 2006 - 07:33:45 AM »
HemiDog - Sure looks like an awesome setup.  How much does it go for?
« Last Edit: December 27, 2006 - 10:40:26 AM by ChallengerGary »
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline HemiDog

  • Sr. Member
  • ****
  • Posts: 1384
  • Do not Assume!
    • Hemi Dog
Re: Serpentine Belt Systems
« Reply #27 on: December 27, 2006 - 08:47:06 AM »
You are correct.  The kits aren't cheap.  The best prices on the Billet Specialties kit I found at Summit Racing.  The kit comes in four flavors depending what accessories you are running.  The basic kit with only the alternator runs right at $2000.  The big kit with A/C, PS, and alternator is a glorious $2600.  The other two kits sit close to $2300.  Being that the kits with PS have a mini pump, you have to also buy a remote reservoir for the PS fluid.  When talking with Paul Clark, who makes the hydroboost kits, he stated had some experience with this pump, their hydroboost kit and a reservoir in Matt Delaney's '71 Cuda on the Powertour that was causing aeration.  I don't remember what brand of reservoir he told me, but his complaint was that it was just a regular can with no filter or baffling.  They fixed the problem by putting a pot scrubber in the reservoir. :)   Anyway he was suggesting using a reservoir from PSC ( www.pscmotorsports.com ) with the mini pumps.   They had one other issue with one of the idler pulleys giving out, but they attributed it to not being torqued correctly on the install.
« Last Edit: December 27, 2006 - 08:48:40 AM by HemiDog »

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Serpentine Belt Systems
« Reply #28 on: December 28, 2006 - 05:29:38 PM »
You are correct.  The kits aren't cheap.  The best prices on the Billet Specialties kit I found at Summit Racing.  The kit comes in four flavors depending what accessories you are running.  The basic kit with only the alternator runs right at $2000.  The big kit with A/C, PS, and alternator is a glorious $2600.  The other two kits sit close to $2300.  Being that the kits with PS have a mini pump, you have to also buy a remote reservoir for the PS fluid.  When talking with Paul Clark, who makes the hydroboost kits, he stated had some experience with this pump, their hydroboost kit and a reservoir in Matt Delaney's '71 Cuda on the Powertour that was causing aeration.  I don't remember what brand of reservoir he told me, but his complaint was that it was just a regular can with no filter or baffling.  They fixed the problem by putting a pot scrubber in the reservoir. :)   Anyway he was suggesting using a reservoir from PSC ( www.pscmotorsports.com ) with the mini pumps.   They had one other issue with one of the idler pulleys giving out, but they attributed it to not being torqued correctly on the install.

Good lord!! if it costs that much I would rather have a big block fuel injection system for that kind of money. I was thinking maybe a grand, but then again I was just thinking of the pullies and brackets, not alternators, power steering pumps and air conditioner compressors included.
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*