69, 383 w/906 heads, e-body headers Ft. Myers, FL

Author Topic: 69, 383 w/906 heads, e-body headers Ft. Myers, FL  (Read 1031 times)

Offline MWILSON904

  • Jr. Member
  • **
  • Posts: 24
69, 383 w/906 heads, e-body headers Ft. Myers, FL
« on: January 07, 2007 - 03:59:55 AM »
1969 383, 906 heads, new headman headers (have some scatches)
offenhauser intake (old), Holly carb new but surface rust on linkage,
I can take some pics if anyone is interested, I'm in Ft. Myers, FL.
600.00 for all.

Mike
« Last Edit: January 07, 2007 - 08:43:23 AM by MWILSON904 »




Offline BlueStreak_Johnnie

  • Jr. Member
  • **
  • Posts: 152
  • Y helo thar from Sunny South TX
Re: 69, 383 w/906 heads, e-body headers Ft. Myers, FL
« Reply #1 on: January 07, 2007 - 08:57:35 AM »
would you split the combo and sell the headers separately  ?
« Last Edit: January 07, 2007 - 09:01:24 AM by BlueStreak_Johnnie »

Offline MWILSON904

  • Jr. Member
  • **
  • Posts: 24
Re: 69, 383 w/906 heads, e-body headers Ft. Myers, FL
« Reply #2 on: January 07, 2007 - 09:37:19 AM »
Yeah no problem, if you can pick them up.  I'm too lazy to mail them.
They are Hedman Headers, the # on them is 78030 (I'm guessing that's a part #)  I'll take $100.00, or 25% of the cost new (whichever is less)

Offline scf100

  • Full Member
  • ***
  • Posts: 795
  • FAST LANE FOREVER!
Re: 69, 383 w/906 heads, e-body headers Ft. Myers, FL
« Reply #3 on: January 08, 2007 - 08:56:23 AM »
Mike, is it an HP motor?

if so what is the date code?

thanks,
Stuart
1970 Challenger R/T convertible 383…. 4-speed…3.91 suregrip

Triple Black

Offline mspcuda

  • Jr. Member
  • **
  • Posts: 13
Re: 69, 383 w/906 heads, e-body headers Ft. Myers, FL
« Reply #4 on: January 08, 2007 - 09:35:10 PM »
are the 906's built? to what specs? thanks a lot!

Matt
Push a Chevy, Drive a Ford...just get out of my way.......MOPAR OR NO CAR!

Offline MWILSON904

  • Jr. Member
  • **
  • Posts: 24
Re: 69, 383 w/906 heads, e-body headers Ft. Myers, FL
« Reply #5 on: January 09, 2007 - 04:22:38 PM »
Sorry for the delay,
I'm sure it's not an HP, stamped by the dist. it say's
E 383
5  28
That's all I can see.
the casting has 4-25-69

I don't know anything else, I removed one of the heads to take some pics.  They are too large to post on here.  I can e-mail them if anyone wants.
The guy next door said that the heads have the "better springs" but he doesn't know anything either.  sorry for the lack of info