73 Cuda Console fit up

[chevyconvert]

as you may recall, my car was converted to the 4-speed.
Here are a couple of shots of my console. It does have the ashtray in the rear, so not a '70 which is fine.
If this is incorrect for use with a 4-speed..what problems could it cause?
Could it be putting the shifter in a bind or contributing to the shifter rattling?
can/should it be modified ?

[chevyconvert]

   thanks in advance 

[Chryco Psycho]

looks like the console will pinch the boot & could cut it , other than that it should have no effect , the top plate is correct

[TreeFrog]

Does anyone have a pic of the manual gear selector?

[chevyconvert]

looks like the console will pinch the boot & could cut it , other than that it should have no effect , the top plate is correct

Anyone have any idea why my console/boot fit is so much different (squished) than the proper one on the first page of this thread? Bracket missing or    ??
Looks like my console top warps downward where the other one looks straight on top above the cutout?
Fixable?

[Chryco Psycho]

looks like the right console , possibly you have too much insualtion under the carpet pushing it up too much 

[IMNCARN82]

I like those real wood pistol grips.Where could I find some? Good luck!  Thanks.