Author Topic: another front end rebuild ? (Read 698 times)

dougs bs23 · « **on:** January 30, 2007 - 01:36:33 PM »

So today i completely tear the front end down and now after reading about everyone elses rebuilds here I'm going to ask the same ? 1: If using polygraphite will i need new lca shafts or can I reuse my existing shafts? 2: is it common for the t-bad adjusting bolts to be 2 different lengths?

my left side is 4" and the right side is 3-5/8 and i find it strange where is a spacer between the lca and the swivel? I know they did all kinds of ierd things on the lines in the 70's but?

?? different length bolts. Any one have an extra 4" t-bar adjusting bolt laying around?

thanks,
Doug

rusty dodge · « **Reply #1 on:** January 30, 2007 - 05:01:18 PM »

You can use the existing shafts.

Chryco Psycho · « **Reply #2 on:** January 30, 2007 - 06:12:49 PM »

something Must have been changed to have 2 different T bar bolts , I just saw new ones advertised in the last week , probably in one of the Mopar mags

dougs bs23 · « **Reply #3 on:** January 31, 2007 - 05:43:26 AM »

cool,,, thanks guys,, I'll just pick up some new ones.. you know how it is trying to do this on a budget,,

Author Topic: another front end rebuild ? (Read 698 times)

dougs bs23

another front end rebuild ?

rusty dodge

Re: another front end rebuild ?

Chryco Psycho

Re: another front end rebuild ?

dougs bs23

Re: another front end rebuild ?