Author Topic: Clean the wheel  (Read 1182 times)

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Clean the wheel
« on: March 11, 2007 - 06:52:22 PM »
What is going to be the best product to use to clean up my horn button and spokes on my wheel ?
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD




Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Clean the wheel
« Reply #1 on: March 11, 2007 - 07:27:14 PM »
Though I don't know how well that silver edging would hold up, but I've always had good results with Castrol Super Clean Degreaser (in the purple bottle) that's been diluted a little by some water.  It works great for cleaning deep down into all the small cracks and such.  Once that's been thoroughly cleaned off, give it a protective coating using Turle Wax's 2001. (in the green spray bottle)  It's less slimely than ArmorAll and gives the part a nice, clean finish.  I've used these steps on both my console as well as my two spoke wheel and both turned out looking very nice. :cheers:  Hopefully this gives you one possible option to go about cleaning it.  The only thing I'd be worried about is whether or not the Degreaser rubs the silver off the three spoke cover. :dunno:
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: Clean the wheel
« Reply #2 on: March 11, 2007 - 07:45:12 PM »
Thats what I was worried about too is the silver. I've tried to stay away from Armour All for the same reasons you have but have not tried the Turtle Wax 01.
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Clean the wheel
« Reply #3 on: March 11, 2007 - 08:59:11 PM »
Thats what I was worried about too is the silver. I've tried to stay away from Armour All for the same reasons you have but have not tried the Turtle Wax 01.

After cleaning, repaint the silver and make it look lik it was new again  :dunno:

Lunch

Offline loco440

  • Jr. Member
  • **
  • Posts: 115
Re: Clean the wheel
« Reply #4 on: March 12, 2007 - 02:55:12 AM »
The silver will come off very easy where it was thinly painted,then looks bad,it happened to me so I took all the silver off,how to repaint it?I dont know it looks very fiddly. 

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: Clean the wheel
« Reply #5 on: March 12, 2007 - 05:07:25 AM »
After cleaning, repaint the silver and make it look lik it was new again  :dunno:

Lunch

What color silver did they use?
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline Stacked440

  • Sr. Member
  • ****
  • Posts: 1026
Re: Clean the wheel
« Reply #6 on: March 12, 2007 - 09:02:55 AM »
I found SEM silver looks almost identical to the factory silver finish on a number of things, it looks a little to bright until it dries, then it looks perfect.  Don't have a part number I'll see if I can dig one up. :thumbsup:
-Kyle-
1971 Challenger R/T clone 440/5-spd
1973 Duster - 5.7L Hemi swap project

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: Clean the wheel
« Reply #7 on: March 12, 2007 - 10:01:26 AM »
I found SEM silver looks almost identical to the factory silver finish on a number of things, it looks a little to bright until it dries, then it looks perfect.  Don't have a part number I'll see if I can dig one up. :thumbsup:


 I think I found it.
http://www.tcpglobal.com/autobodydepot/sealcoat.aspx?OVRAW=sem%20paint&OVKEY=sem%20paint&OVMTC=standard#
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline Stacked440

  • Sr. Member
  • ****
  • Posts: 1026
Re: Clean the wheel
« Reply #8 on: March 12, 2007 - 03:34:06 PM »
yup thats the stuff :thumbsup:
-Kyle-
1971 Challenger R/T clone 440/5-spd
1973 Duster - 5.7L Hemi swap project