Flip-top gas cap

[Stacked440]

I just got my flip-top gas cap installed, but the trim ring rattles between the car and the cap, and the screws are visible...is this normal or am I missing a piece?

[Tropicalcats]

 


Are you taking about the mounting screws for the flip top? The screws would not show.

[nivvy]

I just installed a new one as well.... I used allen heads and nylocks so someone cant steal it..... fit tight with no rattles...you had to have put it on wrong...

[Bullitt-]

I doubt that you could put on wrong, this is too straight forward. Could you have the wrong cap or ring, there are similar items for earlier model Barracudas & Chargers.

[Stacked440]

I'll snap a picture today

[MyMopar]

Was this an ebay cap repop or ?

[Stacked440]

Repop, Heres the pics of it.

[nivvy]

mine is nice and tight.... im using the allen heads with nylock though so it cant be stolen..........

[Bullitt-]

Repop, Heres the pics of it.

Looks like the right stuff.. IF the screws that hold the cap assembly on are tight I don't see how the trim could be loose. Comparing your & srokers pics the only difference appears to be that there may be a larger gap above the release button but that could just be camera angle. It appears the screws are visible on both.

[Stacked440]

Guess ill try to figure it out...Anyone know where to get the little cap that goes on the inside?

[Bullitt-]

caps were coverd in these
http://www.cuda-challenger.com/cc/index.php?topic=28523.0

http://www.cuda-challenger.com/cc/index.php?topic=25191.0

[nivvy]

I got my locking cap from auto zone.... ever since someone dumped sugar in my dads super bee I'll always have one on ...