brake parts

[sleepychallenger]

i am putting disc brakes on my 70 challenger from a 73 satalite. are there some kind of springs on the caliper bolts that are suppoesed to be there?

[Chryco Psycho]

yes . on the pin type calipers there is a folded metal anti rattle clip under the bolt 

[sleepychallenger]

what do i  ask for to get a new one or does anyone have any extras?

[Chryco Psycho]

if you buy calipers semi loaded they come with all the sprongs & new pins etc , not sure if the hardware kits is available for them separatly but it should be 

[sleepychallenger]

i have new calipers and hardware kits coming in. hopefully i they will be in there.

[sleepychallenger]

anyone have pictures? i will post what came in the kit in just a bit

[RUSTY Cuda]

First pic is the ones that came with the new callipers, couldnot figgure out how to get em on so I used the old type I had ! (2nd pic) Rich.

[sleepychallenger]

thanks, that is what my new ones look like but i cant figure out how that would work either. does anyone have any extra old style ones?

[RUSTY Cuda]

I got lucky a friend had 2 new ones & i actually had 2 left on the car, napa didn't have them, there is a chance that an older parts store might just have em hangin on a brake parts rack, I can't find my pic of the new ones still in the pac, was hopin to scope a part # for ya. Rich.

[sleepychallenger]

i will figure it out, my fav part is that i will finally have disc brakes

[RUSTY Cuda]

I don't think you really need em ,on my 74 they are missing, brakes work fine, haven't driven it enough to know if they actually rattle or not? Rich.

[sleepychallenger]

as long as i stop and the brakes dont fall off, im good

[sleepychallenger]

well i went to do the swap today and found that i have to have the banjo style brake lines and that the arm that goes to the tie rod end would not work so i have to use the one from my drums. i hate it when this happens