'cuda hood callouts

[dougs bs23]

I'd like to know if someone may have some type of template or the locations and dimentions for hood callouts for a cuda hood.   Sorry purists I know it wasnt on the car originally but I like the look so I want to drill the holes as I prep the hood for paint.  Any help would be greatly appreciated
Doug

[4Cruizn]

I thought there were dimples where the callouts were suppose to go?   

[Super Blue 72]

I didn't know that the Rallye/Power Bulge/whateveryoucallthem hoods came without the call outs? 

I guess if you special ordered the hood and if it wasn't a 'Cuda then no call outs??? 

[ChallengerGary]

73/74 Cudas with 318's had no callouts.  Same with Challenger 318 Rallyes.

[dougs bs23]

73/74 Cudas with 318's had no callouts.  Same with Challenger 318 Rallyes.

i know  but still would like to put them on as i have a 70 coded 340 to drop in this thing

[IMNCARN82]

20 1/2 inches to the first hole from the back (firewall) side of the hood.

[dougs bs23]

IMNCARN82,  thank you,,, thats what I was looking for 

[Super Blue 72]

i know  but still would like to put them on as i have a 70 coded 340 to drop in this thing

I think he was answering my question, thanks! 

Glad you got the measurements, dougel!

[dougs bs23]

and how far up or down the "scoop" should they be?   centered?  more towards the bottom?    ahhhhhhhhhhhhhhh!!!!!!!!!!!!!

[fishn4cuda]

Rear hole is 1" from the centerline of the bottom curve to the centerline of the hole. The forward hole is 1 1/8" centerline. Measured of an original Cuda340 hood. If you look at it the emblem follows the top body line.
fishn

[dougs bs23]

  fishn  thank you., as for the 20-1/2 that puts it right in the cross brace but i can make it work,,, thanks everyone

[IMNCARN82]

measure twice....cut once    I'd post pics but still havn't got my camera back

[dougs bs23]

ill wait for your pics before i drill just to be sure  maybe you can shoot one from the underside for me to