Author Topic: Restoration  (Read 2620 times)

Offline VTMopar

  • Sr. Member
  • ****
  • Posts: 1056
  • '70 Challenger Convertible, '74 Challenger Rallye,
Restoration
« on: July 11, 2007 - 05:54:31 PM »
 :feedback:

Windshield Garnish Mouldings:   Are these common part numbers from 1970 to 1974 -- will all years interchange?   Also, are they the same for convertibles vs. hardtops (again -- will they interchange?)       

Challenger outside door handles - I see references that they are different for Cuda's vs. Challengers -- is this true?   Also, if I were to get mine re-chromed -- what is the original color under the "latch" part (mine appear to not to be chromed.... but a dark color.... but perhaps just worn??   

Thanks
Vermont MOPAR
VT MOPAR




Offline 70RTdroptop

  • Full Member
  • ***
  • Posts: 608
  • 1970 Challenger R/T 440-SixPack
Re: Restoration
« Reply #1 on: July 11, 2007 - 08:19:57 PM »
Don't know about the windshield moldings, but as far as outside door handles go, the 'cuda and Challenger handles are different from each other. As I recall, the Challenger handles bow slightly inward to follow the door sheetmetal, moreso than the 'cuda handles. I think that's the case, anyway.
1970 Dodge Challenger R/T 440-6 convertible
1966 Ford Mustang convertible  - numbers matching (wife's car )

Offline fishn4cuda

  • Cuda Fan!
  • Sr. Member
  • *
  • Posts: 1338
  • Ft. Jennings, OH
Re: Restoration
« Reply #2 on: July 12, 2007 - 04:06:36 AM »
The windshield reveal moldings are the same for Cuda and Challenger 1970-74. Convs are the same as Hardtops.
fishn
Cant kill the mean and ugly. Only the good die young...I plan to be here a while!!

Offline mrob

  • Jr. Member
  • **
  • Posts: 200
Re: Restoration
« Reply #3 on: July 12, 2007 - 08:10:18 AM »
Don't know about the windshield mouldings, but I do know that the door handles are different numbers. What 70RTdroptop says is correct - there is a small contour difference between the two handles. But guess what? You can use the Cuda handles on a Challenger. By using 2 door handle gaskets on each door handle, the Cuda handles can be used a Challenger door.

Offline RusTy/SE

  • Sr. Resident
  • ******
  • Posts: 5456
  • Just havin' fun
Re: Restoration
« Reply #4 on: July 12, 2007 - 05:42:14 PM »
The correct door handles for a Dodge E-body when viewed from the side are curved inward or concave - the Plymouth E-body when viewed from the side are curved outward or convex.

Russ :cheers:
Russ
2001 Durango     1B4HS
1970 Challenger  JS29U
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
Member since December 13, 2002

Offline VTMopar

  • Sr. Member
  • ****
  • Posts: 1056
  • '70 Challenger Convertible, '74 Challenger Rallye,
Re: Restoration
« Reply #5 on: July 12, 2007 - 07:48:44 PM »
Thanks!     Very helpful -- Now.... on the Challenger door handles -- what about the color where you "insert" your fingers?   Is it chrome, black... or ????

Thanks
VermontMOPAR
VT MOPAR

Offline PlumCrazy

  • Jr. Member
  • **
  • Posts: 349
Re: Restoration
« Reply #6 on: July 12, 2007 - 09:54:08 PM »
Dark argent

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: Restoration
« Reply #7 on: July 12, 2007 - 10:14:42 PM »
If your looking for Challenger handles I would hold out and get the correct ones for a Challenger . If you just need too have them redone this iss the guy to do them. Great job and will restore them to the original with all new internal pieces.

www.julesdaddio.com
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Restoration
« Reply #8 on: July 13, 2007 - 05:52:33 AM »
Those look nice.  :bigsmile:  I bought re-pop junk and sent them back.
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"