Author Topic: Passenger Mirror Location  (Read 993 times)

Offline filmsurgeon

  • Full Member
  • ***
  • Posts: 594
  • Resto-Mod '70 Convertible Challenger
Passenger Mirror Location
« on: July 09, 2007 - 01:27:54 PM »
I purchased a pair of the 1970 Challenger chrome mirrors from the folks at PG Classic and am extremely happy with them.  I have not installed them yet, but will be doing so soon.  My Challenger currently does not have a passenger side mirror.  Can anyone tell me where the mounting holes should be placed on the passenger door?  I'm hoping to learn of the location measurements before I get too frustrated and just "wing it".  Thanx
1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Passenger Mirror Location
« Reply #1 on: July 09, 2007 - 04:13:41 PM »
I measured mine once upon a time. They are the same as the driver's side.



  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Passenger Mirror Location
« Reply #2 on: July 09, 2007 - 04:37:48 PM »
Barry has a good write up of how to add another mirror here http://www.hamtramck-historical.com/mirrors.shtml f I were to add a mirror on the pass side I would use the same measurements from the driver side  :dunno:

Lunch

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: Passenger Mirror Location
« Reply #3 on: July 17, 2007 - 08:52:37 AM »
Let me know if you want to buy the NAPA thread tool from me.  I bought it new from NAPA and only used it once for this purpose.  I think it cost $129 new.  You (or anyone else) can make me an offer for it.

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com