Author Topic: Anyone have a '70 Cuda without ECS?  (Read 1857 times)

Offline drag-n-cuda

  • Jr. Member
  • **
  • Posts: 39
Anyone have a '70 Cuda without ECS?
« on: July 28, 2007 - 10:50:30 PM »
I have a '70 Cuda with ECS.  It's some kind of vapor recirculation system made for California.  I want to know if the non ECS cars don't have this oval hole in the floor or if there is a plate that covers it up.  I'll buy a plate if the reman them.  If not I'll have to make one.

Thanks,
drag-n




Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: Anyone have a '70 Cuda without ECS?
« Reply #1 on: July 29, 2007 - 08:55:40 AM »
I have a '70 Barracuda (non-California) and this is what's in my trunk. Not sure if this'll help answer your question though.
John

1970 Barracuda convertible
2014 Toyota Avalon

Offline drag-n-cuda

  • Jr. Member
  • **
  • Posts: 39
Re: Anyone have a '70 Cuda without ECS?
« Reply #2 on: July 29, 2007 - 12:04:12 PM »
JayBee,
     Yes, that helped.  I saw those plates on the YearOne website.  Are there any filters at the top of the vent tubes?

Thanks,
drag-n

Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: Anyone have a '70 Cuda without ECS?
« Reply #3 on: July 29, 2007 - 06:09:28 PM »
drag-n-cuda

Those aren't tubes, it's one continuous tube that bends to and up the trunk brace, the back down. One end (under the trunk) has a rubber hose connected to it and goes to gas tank. The other end (also under the trunk) is about 9 inches long and just points to the ground behind the tire kind of above the spring. There are no filters.
John

1970 Barracuda convertible
2014 Toyota Avalon