Author Topic: Map light plastic frame  (Read 2967 times)

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Map light plastic frame
« Reply #15 on: July 23, 2007 - 11:32:30 PM »
The dark one looks good. But as long as either one is in decent shape, I take either one.

I haven't cleaned the dirty one yet. Its only 37 year old gravel road dust mixed with beer spray.  :smokin:

Lunch




Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Map light plastic frame
« Reply #16 on: July 23, 2007 - 11:35:12 PM »
Going to get pics of the trim piece I have... be back in a few.

« Last Edit: July 23, 2007 - 11:40:17 PM by Lunchbox »

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Map light plastic frame
« Reply #17 on: July 24, 2007 - 08:16:20 PM »
Well we had a little hiccup on the forum last night that held up everything.
 :popcorn:
Mike, Fremont, CA.


Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Map light plastic frame
« Reply #18 on: July 24, 2007 - 11:30:37 PM »
Did you want just the trim piece?

Lunch

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Map light plastic frame
« Reply #19 on: July 24, 2007 - 11:47:21 PM »
Re check my stash of parts and I'll get back to you. I thought I still have the light housing part. I need to double check.
Mike, Fremont, CA.


Offline r15303

  • Jr. Member
  • **
  • Posts: 354
Re: Map light plastic frame
« Reply #20 on: July 26, 2007 - 12:46:13 AM »
Hey Lunch
I might be interested in the other trim piece if you want to sell it but Topcat gets first choice.  :bigsmile:
Thanks
mark

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Map light plastic frame
« Reply #21 on: July 26, 2007 - 01:02:33 AM »
Lunch, I can't let you know till Saturday evening. Parts I have are in another location.
Mike, Fremont, CA.


Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Map light plastic frame
« Reply #22 on: July 26, 2007 - 02:47:07 AM »
Lunch, I can't let you know till Saturday evening. Parts I have are in another location.

Thats fine its not doing anything for me know, I wan't planning on selling it till later unless you want it  :icon16:

Lunch


Offline FY1443433

  • Full Member
  • ***
  • Posts: 593
  • 1971 Superbee, 1970 Challenger R/T
Re: Map light plastic frame
« Reply #24 on: July 26, 2007 - 05:33:21 AM »
I am need of one too.  If anyone has one extra to offer.  Thanks!


FY1

Offline loco440

  • Jr. Member
  • **
  • Posts: 115
Re: Map light plastic frame
« Reply #25 on: July 30, 2007 - 05:39:55 AM »
I found one of those lites under my dash and turfed it in the scrap bin not knowing what it was,looked a bit second hand stuck up there,now I know what it is,could some one tell me where the wiring goes,out of the back of it it has a pink wire cut at about 3inch long,a brown wire goes to a plug with yellow wire coming out cut 3inch long.

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Map light plastic frame
« Reply #26 on: July 30, 2007 - 11:34:58 AM »
I tried tracing mine for you but the wires just got lost in the main wiring bundle. The yellow wire did connect into a rubber coated butt joint behind the guages about a foot from the firewall bulk head. The pink wire went into the main wire bundle about 6 in from the bulkhead.

Lunch