Author Topic: console hinges  (Read 832 times)

Offline 70challengerrt

  • Jr. Member
  • **
  • Posts: 487
console hinges
« on: September 12, 2007 - 08:43:59 PM »
Does anybody sell new console hinges? Are B and E bodys the same?




Offline buzzard

  • Jr. Member
  • **
  • Posts: 285
  • Why is their AIR
Re: console hinges
« Reply #1 on: September 12, 2007 - 10:50:12 PM »
 What are you looking fore?

Offline 70challengerrt

  • Jr. Member
  • **
  • Posts: 487
Re: console hinges
« Reply #2 on: September 13, 2007 - 09:14:19 PM »
The hinge for the console door on a charger. It seems that all the console I look at the hinges are bent or tweaked and the door never fits right.

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: console hinges
« Reply #3 on: September 13, 2007 - 09:21:41 PM »
Seems like I did see some re-pops once but I cannot find them now.  71+Charger console is the same. Tweaked is common, mine was that way since I got the car in '75...I used to jack with it to no avail but over the years I've learned a thing or two about how things work so last year I took the the lid apart, glued the broken underside together, straightened out the metal hinge pretty good & patiently adjusted till it looked & worked better than ever.... added a little strip of foam to the contact points to keep it nice & tight.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: console hinges
« Reply #4 on: September 14, 2007 - 02:50:45 AM »
make sure it si not on upside down , it can be installed with the hinge reversed & the door will not sit right

Challenger - You`ll wish You Hadn`t

Offline 70challrtse

  • Full Member
  • ***
  • Posts: 728
Re: console hinges
« Reply #5 on: September 14, 2007 - 07:44:11 AM »
Your hinge my not be the problem, it could be that your lid is warped.