4 BBL Shaker Hood Parts List

[EvilTwinATX]

I am trying to finish buying all of my shaker hood parts... I have the hood done already but need alot of underhood parts. Can anyone help me figure out what EXACTLY I need. I cannot afford to get the steel repop parts so they are going to have to be the fiberglass versions. What I am having the most trouble with is figuring out the bolts etc..

Here is what I already have:
Hood (done)
Shaker Bonnett (bubble)
Cold/Warm Air Doors
Grilles
Home-made Bell Crank
Adapter Ring Seal
Carb-Air Cable Set

What know I need:
4BBL Shaker BasePlate
4BBL Air Cleaner Lid (Round)
Adapter Ring

BUT DO I NEED:
Mounting Feet???
BasePlate to Adapter Ring Bolts??
Bubble to Adaptor Ring Bolts??
I also need screws to mount the doors, etc. to the bubble??

Thanks!

Brent

[ragtopdodge]

What kind of motor?  340?  383?  440?

[EvilTwinATX]

Sorry 440..

[BIGSHCLUNK]

Just curious, what carb are you running? We had to fab a shaker base for the Holley (clearance issues)

[EvilTwinATX]

I am planning on running an edelbrock thunder series 800 cfm with electric choke...

any words of wisdom since you have done this?

[BIGSHCLUNK]

I had pics of what I did but they got erased or maybe they're on the shop computer. I had 2 different problems overall height, and clearance for the float adjusters on the carb. I did a post and some of the pics were of what we did are there if you can find them. I do not have the correct mounting feet (if these are the ones that go under the base) But it has not been an issue. I also dont run the air doors cause shes a nice weather car only. I know its not "correct" but it has not been an issue.