Yet another Painless wiring question.

[shatar4]

On the headlight section, I am wiring up the side markers, turn signals/marker lights in the front. The manual shows:
wire 927 (grn/red) going to the Parking lights
wire 927 (grn/blk) going to the marker lights
wire 925 going to the right front turn signal.
My question is I have one side marker light and one turn signal on each side. How do I hook up these wires so I have running lights and a turn signal? Is there not a marker light up front until you tun on the turn signal? There is only 2 wires on each pig tail and one of those are a ground wire. Any help would be awesome!

[Chryco Psycho]

you front lights will have 2 wires 1 is turn [brighter]connect 925 to this  & 1 is park [dimmer]connect 927 here , ground is through the housing  , the side lights hook top the other 927 wire &should ground through the housing also , there is no turn signal on the side light

[shatar4]

I know there is no side turn signal but if one wire connects to 927, where does the other wire conect to?

[Chryco Psycho]

you have 2 wires from the side lights ?

[shatar4]

Yes I do.

[GoodysGotaCuda]

You should have.

A pair of front turn signal/parking lights up front. Three wires, ground, parking,and turn.

A fender top turn signal thats grounded through its case, and has a feed off the turn signal wire from the front marker(from the right side)

A pair of side fender parking lights that feed off that parking light wire that goes to the front markers

[shatar4]

I have no fender top turn signals.