Flywheel and pressure plate...

[71bigblock]

Will this:

http://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idProduct=766


Work with this:

http://store.summitracing.com/partdetail.asp?autofilter=1&part=HAY%2D50%2D105&N=700+4294908110+115&autoview=sku

For a 5.7 Hemi with manual 5 speed?  I got a 5 speed from a 2002 Ram 1500, so I would just get the correct clutch disc. 

 

Thanks   

[Chryco Psycho]

the 2 will work together , I would use a 10.95" disc though , but I do not know if the 8 bolt flange is the same on the newer 5.7 hemi

[71bigblock]

the 2 will work together , I would use a 10.95" disc though , but I do not know if the 8 bolt flange is the same on the newer 5.7 hemi

Thanks CP.  Here is the one that they say is for the 5.7, but what would the difference be? 

http://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idProduct=1602

Is an 8 bolt flywheel an 8 bolt flywheel? 

[71bigblock]

And this disc combined with the Hays clutch, and the above flywheel. 

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_24678_-1

[Chryco Psycho]

not nessisarily , the 2.2 also has an 8 bolt flywheel but with a miniature bolt pattern , I do not have a 5.7 flexplate to check the pattern

[71bigblock]

Bumping this with another question:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AX%3ARTQ%3AUS%3A11&viewitem=&item=200148004163

Are pressure plate bolt patterns standard?  Will this work with the 5.7 specific flywheel? 

[Chryco Psycho]

I cannot answer that , try contacting Red & McLeod , they should know what will work for you

[71bigblock]

I contacted RAM Clutches, and this is what they had to say:

Steve,

I don't normally like to comment on ebay items, but a 401 pressure plate has
a bolt circle of 11.625" measure the bolt pattern on your flywheel to see if
it will bolt on. This is assuming that what he is selling is indeed a 401
pressure plate,like he said was.

Doug
RAM TECH

So with an 11 5/8 bolt circle, will it bolt up to that flywheel?  Or do I have to order it and measure it?  I could go and check my 318 flywheel, maybe they have the same pattern.

Thanks for your patience and knowledge CP.   

[Chryco Psycho]

there are 2 patterns I know of , the Long style with 3 pairs of bolts close together & the Borg & beck style with 6 eqaul spaced bolts , if you can see the pattern on the flywheel & it is equal spacing the clutch will bolt on if it is a B&B style