Rear Brake Hose-1970 Challenger

[LAA66]

 The parts store didn't have a number for a 70 so picked up a 71. Problem is the hose end at the axle distribution block bottoms in the center before the washer on the outside. I could add washers but these are brakes so no way. I read through other topics and cannot find any answer to a possible replacement. (Besides Year One-rather not wait that long). Anyone had luck finding this part lately?

Thanks,

Jon

[Chryco Psycho]

does it seal with the washer or the flare inside the block ?

[LAA66]

  Not really sure but the original sealed with the flair inside. The center contacts first and would need about 4 of the copper washers that come with the hose to seal the outside. The flair looks a little different too, I was thinking of using some blue dicome to see if it seats properly. Also the hose ID is smaller then the original.

[CUDA JAS]

Have you tried Rock Auto??