Author Topic: mirror base install.....  (Read 646 times)

Offline challenger71

  • Jr. Member
  • **
  • Posts: 358
mirror base install.....
« on: September 13, 2007 - 10:25:46 PM »
I have a set of chrome mirrors adn need to install a new set of bases on them. Does anyone know how to dismantle the mirrors? Do I have to break the actual mirror or will it come off without breaking it? I have to wait for my new bases but I will be doing this in the next couple of weeks.
10 years in the making......




Offline FY1Cuda

  • Sr. Member
  • ****
  • Posts: 1493
Re: mirror base install.....
« Reply #1 on: September 14, 2007 - 01:36:23 AM »
The screw that holds the base to mirror body is in the inside of the base so it is accessible.  If your driver side mirror is a remote, you'll have to undo the cables (carefully) to get the base off. 

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: mirror base install.....
« Reply #2 on: September 14, 2007 - 08:36:05 AM »
On the passenger side I was able to tilt the mirror far enough to get a Phillips head screwdriver in at an angle to remove & then reinstall the mirror. This may work on the driver side but I have not needed to try.  The mirror is mounted on solid metal so breaking it would accomplish nothing.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: mirror base install.....
« Reply #3 on: September 14, 2007 - 10:28:39 AM »
removing the cables for the remote without distroying the die cast part is very difficult

Challenger - You`ll wish You Hadn`t