Author Topic: Trans linkages  (Read 1033 times)

Offline BadJoey

  • Full Member
  • ***
  • Posts: 982
Trans linkages
« on: September 25, 2007 - 08:38:17 PM »
I hope to put my 1970 Challenger :burnout: 4 speed in this week end . Keeping in mind I am not the one who took it a part ,I'm not sure what linkage goes where . All 3 are different as well the levers that go on the trans are different as well . Should the levers be pointing up or down . Dose anyone have or know where I might find a pitcher ? I can probably figure it out however a pitcher would make it easier plus then I would be sure .




Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Trans linkages
« Reply #1 on: September 25, 2007 - 09:11:36 PM »
All 3 go up

Offline BadJoey

  • Full Member
  • ***
  • Posts: 982
Re: Trans linkages
« Reply #2 on: September 26, 2007 - 07:57:56 PM »
 :2thumbs: Thanks

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Trans linkages
« Reply #3 on: September 26, 2007 - 09:34:56 PM »
scanned from a 73 service manual
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline BadJoey

  • Full Member
  • ***
  • Posts: 982
Re: Trans linkages
« Reply #4 on: September 26, 2007 - 10:22:57 PM »
This site and you guys are the best . Not sure where I would be without all the help . Sorry to say I still have a long way to go so long as you guys are willing to help I'll be back . :clapping: :clapping:

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Trans linkages
« Reply #5 on: September 26, 2007 - 11:14:03 PM »
a little more help would be to suggest that you intall the shifter and rods after the trans install. There's no way around it. So make sure the shifter and bars are off before you install in car :bigsmile: