73 Charger Front End Rebuild

[bordin34]

Does this list look right for the rebuild of my Chargers front end?
2-Tie-Rod Adjusting Sleeve     Moog ES440S          C-Body Part
2-Inner Tie-Rod End              Spicer 4011049        C-Body
2-Outer Tie-Rod End              Spicer 4011047       C-Body

2-Upper Ball Joints                Moog K7262N         Threaded
2-Lower Ball Joints                Moog K719            Threaded
4-Cam Bolts                        Spicer 6161013
1-Pitman Arm                      Spicer 4501028
1-Idler Arm                         Spicer 4501032
2-LCA Bushings                    Spicer 5651028     Rubber, just in case I mess up the sleeve in the arm currently

Just Suspension
Poly Strut Rod Bushings
Poly Control Arm Bushings LCA's and UCA's  LCA's have no sleeve.

Does this seem complete?
Dan

[quapman]

These guys can probably answer for sure. A lot of that stuff is same as e-body, but with the different control arms and stuff.........

http://wichargerguy.proboards101.com/

This is the BEST 3rd gen Charger site on the net.


Steve

[Bullitt-]

Do you have a sway bar? .. end links & sway bar bushings, how about torsion bar seals.

[bordin34]

I have a new sway bar and bushings that will go in. Figuring the part numbers are correct is this all I need beside torsion bar boots and seals.