Author Topic: Parking Brake question  (Read 1562 times)

Offline Scatterbrain

  • Jr. Member
  • **
  • Posts: 466
  • 1973 Challenger
Parking Brake question
« on: December 08, 2007 - 07:40:46 PM »
The parking brake on my car was working when I bought it, however, it wouldn't release the driver side brake correctly.  The adjusting hook had about 3 inches of nuts being used as spacers to get the tension on the cable.  The new cable doesn't seem to have the reach for the adjusting hook I have.  It is 15 inches from the hook part.  How long is the adjusting hook supposed to be? 




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Parking Brake question
« Reply #1 on: December 08, 2007 - 07:43:03 PM »
If your referring to the threaded rod that hooks under the passenger side frame I'd say about 10"...if you need I can get an exact # for you.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Parking Brake question
« Reply #2 on: December 08, 2007 - 09:35:29 PM »
If you have the 2 short rear cables, that hook is pretty long.
this your setup?

Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Parking Brake question
« Reply #3 on: December 08, 2007 - 09:40:22 PM »
here's the shop manuel pic

Offline Scatterbrain

  • Jr. Member
  • **
  • Posts: 466
  • 1973 Challenger
Re: Parking Brake question
« Reply #4 on: December 08, 2007 - 11:37:53 PM »
Rusty Cuda, thats my setup.
I searched the forums and found the shop manual pic and set it up like that, but at 15" the hook I have isn't long enough.  Yours looks to be longer than 15".

Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Parking Brake question
« Reply #5 on: December 09, 2007 - 09:28:47 AM »
I will measure it up, not sure I can get out there today, going into the city to help my dad out, got a leak on his heating system, I should be able to measure it monday, if I had to guess I'd say 20ish inches,goes from one side almost to center of car. Rich.

Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Parking Brake question
« Reply #6 on: December 09, 2007 - 10:21:09 PM »
K, I got home early enough to measure up that hook, It's 18" (give or take a tad) , hope that helps ya. Rich.

Offline Scatterbrain

  • Jr. Member
  • **
  • Posts: 466
  • 1973 Challenger
Re: Parking Brake question
« Reply #7 on: December 10, 2007 - 06:14:11 PM »
Thanks.  I guess the one I had isn't for an e-body.  That also explains why the replacement cable was shorter than the one it had in the first place.  Guess I gotta order one.

Offline Scatterbrain

  • Jr. Member
  • **
  • Posts: 466
  • 1973 Challenger
Re: Parking Brake question
« Reply #8 on: December 13, 2007 - 11:06:52 AM »
Anybody know where I can order  an adjusting hook?  Do they repop them or is it junkyard time ?

Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Parking Brake question
« Reply #9 on: December 13, 2007 - 06:21:51 PM »
Post up in parts wanted, with all the part outs somebody has to have one,
 someone on ebay sold a kit, but not sure it that hook was in it? Rich.

Offline Scatterbrain

  • Jr. Member
  • **
  • Posts: 466
  • 1973 Challenger
Re: Parking Brake question
« Reply #10 on: January 01, 2008 - 11:32:43 AM »
This came in last week, but with the holidays I haven't had time.  Turns out the ebay vendor was www.inline-tube.com, they carried each piece of the parking brake setup. 

Wow, now thats a difference you can see.  Not only is the new one longer, its beefy.



Offline RUSTY Cuda

  • Sr. Member
  • ****
  • Posts: 1948
  • One big step foward!
Re: Parking Brake question
« Reply #11 on: January 01, 2008 - 11:39:45 AM »
 :thumbsup: