Author Topic: crate 6.1 available  (Read 647 times)

Offline gkring

  • Full Member
  • ***
  • Posts: 825
crate 6.1 available
« on: January 24, 2008 - 10:52:04 PM »
Looks like crate 6.1 hemi's are available from Mopar.  info from a posting on Moparts. P5155067
Looks like it comes as a typical crate motor, but with the programmable computer (AEM) already setup to run, a cable operated throttle body, wiring harness, etc. List for $9999, your favorite dealer can probably do better. Doesn't sound too bad considering just the service replacement crate motors were going for $5000 and are supposedly not going to be available much longer. I think I'll stick with the 5.7 for the convertible as it will make all the HP I will need for that car and I can source the added parts needed cheaper.
« Last Edit: January 24, 2008 - 11:02:48 PM by gkring »
Greg
1970 Challenger convertible-in process
1970 Barracuda driver




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: crate 6.1 available
« Reply #1 on: January 25, 2008 - 03:38:19 AM »
 :2thumbs:
 These crates will be better than most mopar crates have been as these will likely assembled for the assy line & just pulled out of the normal build stock 

Challenger - You`ll wish You Hadn`t

Offline dodge freak 2

  • Full Member
  • ***
  • Posts: 825
Re: crate 6.1 available
« Reply #2 on: January 25, 2008 - 09:03:26 PM »
Why do people think the 5.7 Hemi's are so great? They don't seem so in the new Chargers, 300's around my area.

Have seen just a few 6.1...is a noticeable difference--

If I HAD to get a new Hemi-I would go with the 6.1

You can't go by what they say--you need to think what will happen. Now that the 6.1 has been out and theres TOO many, of course Mopar will start selling them.

The 5.7's will start show up-in big numbers-at the wreaking yards in the next few years-prices will start coming down but they be worn out. The new motors can not be bored out like the old. Believe over size pistons are now .005 over-not  .030. The heads might be junk too.
« Last Edit: January 25, 2008 - 09:05:00 PM by dodge freak 2 »