Author Topic: What's This switch For?  (Read 4061 times)

Offline ViperMan

  • Resident
  • *****
  • Posts: 3989
  • 2017 Carlisle or BUST...
    • JS Custom Cars
Re: What's This switch For?
« Reply #15 on: February 01, 2008 - 06:19:21 PM »
Wait, does that pump warm air through the speaker covers?  I'm really not familiar with the rear defrosters on these cars...

Jeff
2000 Dodge Viper GTS Coupe - 8.0L V10, 6-Speed Tremec
2005 Jeep Grand Cherokee Limited - Trail Rated - 4.7L V8, Auto
2010 Dodge Challenger SE Rallye - 3.5L V6, Auto (Wife's!)




Offline Slotts

  • Sr. Member
  • ****
  • Posts: 1893
Re: What's This switch For?
« Reply #16 on: February 01, 2008 - 06:37:34 PM »
Jeff,

The defogger takes the place of the right speaker in most applications. Typically the car came with the good old Music Master AM radio. A long name for making you think there was something great about listening to AM with a front and rear speaker and a fader. It sounded just like a HD radio. :smilielol:

In some cases where a FM stereo radio was ordered and a rear defogger together, a potmetal housing was used to accommodate both options. With either option, the blower motor exhaust went into a tube that connected to a diffuser under the center of the package tray. Above that on the interior side, a bezel was bolted through the package tray connecting the bezel and diffuser. The heating resistor coil on the motor housing provided the heat. On earlier late sixties units, there was no heating resistor coil. Only cold air blew on the rear window.

Slotts

Offline moparclown

  • Resident
  • *****
  • Posts: 4335
Re: What's This switch For?
« Reply #17 on: February 01, 2008 - 06:40:33 PM »
Great discription slotts

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: What's This switch For?
« Reply #18 on: February 01, 2008 - 07:15:01 PM »
Great discription slotts

 :iagree:

Very informative.

Tom :worshippy
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline Slotts

  • Sr. Member
  • ****
  • Posts: 1893
Re: What's This switch For?
« Reply #19 on: February 01, 2008 - 11:43:44 PM »
To Tom and Moparclown,

Thank you both guys for your kind words, but you just got caught believ'n the hype. :smilielol:
Serioulsy, thank you. It's good to know we are all friends here.

On the non A/C heater boxes, the same heater element was used to "pre-heat" the front passenger area.
The part number for this resistor coil is 2521409 and was used on the rear defoggers and the front non A/C heater boxes.

Hemiken has posted a beautifull example of a passenger side rear speaker/defogger device that clearly shows both mounted together. I didn't see it until just now.
Hey ken, Is that a micro spec of dust that I see in your picture??? :smilielol:

Once again, I hope we are all still friends.

Slotts

Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: What's This switch For?
« Reply #20 on: February 02, 2008 - 03:22:51 AM »
 :clapping: Hey Slotts,

Can you point out where the dust is please buddy. so i can photoshop the image. :smilielol:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.