Author Topic: XV inner fender brace install Qs (Read 4426 times)

shawge · « **Reply #15 on:** February 20, 2008 - 03:48:01 PM »

Thanks for the pics, Travis.

It looks like the tube can only be welded about 75-80% of its circumference around the shock tower. The upper portion facing the rear is very tight and I can't get my MIG gun in there to lay any effective beads. Was that your experience also?

Thanks,
Jerry

Travis72 · « **Reply #16 on:** February 25, 2008 - 12:24:13 AM »

Jerry,

Yeah for sure you can't get the top. I had a local chassis guy weld mine up, because I don't trust myself with any structural welding and I remember that he switched welders to a different gun to get most of the back side.

That being said, you could probably do pull ups off those braces.

Travis
72 Cuda

shawge · « **Reply #17 on:** February 25, 2008 - 01:00:52 PM »

Thanks Travis, that is good to know. Installed the braces up last night and had to leave about 1/2-3/4" of the tube un-welded on top using a narrow cup. Very tight fit to say the least. Pictures to be posted later tonight.

shawge · « **Reply #18 on:** February 26, 2008 - 03:39:36 PM »

Installed. Thanks to Travis for providing pics of his install.

Travis72 · « **Reply #19 on:** February 26, 2008 - 11:41:27 PM »

No problem. Looks great!

Travis
72 Cuda

thedodgeboys · « **Reply #20 on:** February 27, 2008 - 03:21:10 AM »

Nice work

Author Topic: XV inner fender brace install Qs (Read 4426 times)

shawge

Re: XV inner fender brace install Qs

Travis72

Re: XV inner fender brace install Qs

shawge

Re: XV inner fender brace install Qs

shawge

Re: XV inner fender brace install Qs

Travis72

Re: XV inner fender brace install Qs

thedodgeboys

Re: XV inner fender brace install Qs