Author Topic: vapor liquid separator  (Read 759 times)

Offline Beck

  • Full Member
  • ***
  • Posts: 555
    • BECK KUSTOMS
vapor liquid separator
« on: March 03, 2008 - 12:02:03 AM »
hi guys,
i have a 73 barracuda, so it's got a vapor liquid separator just in front of the gas tank as part of it's emissions gear.
a couple of the little hoses leading from it to the tank are perished and need new clamps.
i'm about to replace 'em but was wondering if should just get rid of the whole unit...

the engine bay no longer has the activated carbon can, so do i still need the separator? the little hoses are leaking gas.

what are your guys thoughts on this?

cheers,
aaron
« Last Edit: March 03, 2008 - 02:11:19 PM by aaron beck »




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: vapor liquid separator
« Reply #1 on: March 03, 2008 - 12:59:59 AM »
you can plug the ports off & remove the separater just make sure you ahve eithe one line open preferably running uo 6-8" & back down  or a vented cap so the tank can breathe

Challenger - You`ll wish You Hadn`t

Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: vapor liquid separator
« Reply #2 on: March 03, 2008 - 08:35:57 AM »
Since I just went through this, let me add that if you plug the lines use something fuel rated. I didn't the first time and the caps melted.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars