Hey Cowboy.... Some Go Fast Goodies!!!!

[nivvy]

Just wanted to give you a update... will be shipping out next week.... it will be full crated up and boxed in ... 

Im also throwing in ARP flexplate bolts and the flexplate that came with the converter... the SS springs I also installed solid spring eye bushings and you can have the spring clamps also for 60ft tuning.... and lowering blocks 

Everything is there to bolt up and go 

CHECKLIST: less than 400 miles on setup ... LIKE NEW

B-Body Rear with backbracing
Strange Axels
3" studs
New brake hardware
3/4 Relo Kit
SS Springs with solid spring eye bushing and spring clamps
Driveshaft with spicer u joints
Mancini Racing Built 742 Case / 3.91 / 7290 Yoke setup
Coan Converter with flexplate
Lowering Blocks
Longer U Bolts

StRoKer

[422STROKER]

Hey Stroker, can you measure your driveshaft from center of yoke to center of yoke for me please?

Tom

[nivvy]

Hey Stroker, can you measure your driveshaft from center of yoke to center of yoke for me please?

Tom

46" center to center
crate is 70 * 21 inches total length and makes a perfect fit for a whole assembly....

The 8 3/4 as a full unit by itself weighs in at 150lbs

anyon know how to get ahold of that kid so I can give him that cool BEEWARE plate..... its off my dads old 69 Superbee....

B Body specs are 55" flange to flange and 44" center to center on the perches.... this is the best way to stuff big meats out back on a ebody car......

[422STROKER]

Thanks a bunch Stroker.  I ordered a new shaft this week and it came in the wrong size.  I just wanted to verify that I was close with mine.  I got a 45.6" one coming in.  They sent one that was 49.6.  They cut the tube to 45.6, not center yoke to center yoke like what was ordered.


Oh well, they are sending a new one out Monday with a call tag for the old one. 

Thanks again, I wish I bought that stuff you got!

Tom

[nivvy]

Yea I am the dummy around this place that likes to test stuff out and resell it for a loss.... oh well life is to short... its what I enjoy...   

[422STROKER]

It's not too often you/anyone makes any money doing this stuff.LOL  I got a pile of mistake stuff in the garage and sell/give away when needed.LOL

Tom
 

[CrazyPete]

thats some decent parts too bad i missed you selling it i need all that crap for my car

[cowboy]

-
It aint nice Stroker, - to start this tread for every one to see what they missed...