fader switch & dangling wires????

[RUSTY Cuda]

Mounted my fader switch in the only hole I could find it fit through, sems to me too far away from the radio?
I did pull the after market guages & there is no hole underr them. Rich.

[RUSTY Cuda]

Got some extra wires comming out of the steering column. 2 thin red wires & a plug with 3 wires, purple,tan w/white tracer & green with black tracer, can not find anything to plug it into? any ideas, (an option I don't have?)  Rich.

[Chryco Psycho]

the
2 red wires are for the key in ign buzzer , the 3 to the plug are the extra harness for the side turn lights on Chrysler 300s etc , all replacemnet switches have the extra pigtail but it i snot used on most muscle cars

[RUSTY Cuda]

Thank you sir, now all I have to do is find the other half of the red wires Rich.

[422STROKER]

I think the fader knob goes right above the radio.  On the angled part of the dash.  Hope I explained that right.

Tom

[Chryco Psycho]

the red wires generally connect to the TS switch wiring plug

 Hang on who are you callling Sir ?

[RUSTY Cuda]

Why you Sir psycho! I'll have to look up the TS switch!
72 CO, I'll have to go out & look there, see if there's a hole, mann i took these things off, but I'm not even sure which old car i had that I remember it being down low, but more towards the radio? Old age, it's a bit........ch!  Rich.

[Moparal]

Which dash do you have and what year?  My 70 rallye dash has the fader to the left of the wheel and down on the plastic by the heater selector stuff. Factory location on mine