Finally Finished 4spd Conversion

[ozrt4406]

THANKS CHRYCO  THATS A BIG HELP.

[vinb]

Thanks Guys, should be fun....

Greg / no, I just got a tunnel from Brewer's and used about 10 - 3/16 rivets and seam sealer just in case I want to change it back...

Sleepychallenger / no problem , just ask.....

Aussie / yes , their is a slot in the frame rail but I would still put the bellhousing on to get the correct angle..

[Chryco Psycho]

THANKS CHRYCO  THATS A BIG HELP.

 You are welcome 
 the other thing I forgot to mention that won`t affect you is the mount pad for the crossmemebr mount is in a different locattion on the single shifter mount B body trans

[ozrt4406]

my biggest prob is gonna be the conversion, as my silver rt is right hand drive, so everything i will have to fabricate, thinking hydraulic clutch conversion , as the old z bar stuff on the rhs is gonna be to hard as the steering box is on the rhs chassis rail,std pedal set up and hump , but im gonna need long arms as the shifter is way over to the left so it will have to be modified as well i think.

[Aussie Challenger]

  Check out some of the Valiant Z bars, I have seen a couple of V8 manuals floating around. Offically there were no manuals as I tried to buy new Charger V8 Manual back in the mid '70's. I mentioned that I had seen a couple of panel vans which were supposed to be factory.   

[ozrt4406]

THE ZBAR AINT THE PROB ...ROOM IS.OR LACK OF IT . THE CAR HAS WB HOLDEN POWER STEER BOX , BIG PIPES SO NO ROOM FOR THE MECH SET UP , SO ITS EITHER HYDRAULIC OR CABLE ME THINKS.

[vinb]

Hey CP,
what is the deal with my clutch pedal hanging up? everything is free and working great except sometimes the last inch of travel gets stuck , if you tap lightly it comes up the rest of the way..

[0tter45]

Do you have the over center spring installed on the clutch pedals?

[vinb]

O45, yep its on ....
Everything feels & works good except , it's almost like if something is rubbing but I don't see anything touching..

[Aussie Challenger]

  Ozrt4406 check out Dellow engineering or Castlmaine rod shop for a bellhousing, maybe they can help, I have had many a good discussion Rod Hadfield who I believe may be back there, they are always willing to help.   

[Chryco Psycho]

readjust the clutch , you need to make the rod slightly longer so it will over center & return to the top

[vinb]

Thanks CP , I'll get under there and re-adjust it.
Been a long day outside....7:30am to 5pm doing all that yard stuff..
Now I'll take a breather and do some work on the Cuda..