Author Topic: Mopar tuft steering wheel (Read 1201 times)

daves70 · « **on:** April 24, 2008 - 08:42:42 PM »

Is there a mopar part number or stamp on an original tuft steering wheel?

Moparal · « **Reply #1 on:** April 24, 2008 - 08:44:20 PM »

yeah, I cant remember the actual numbers, but one starts with a 3 the other a 4 I believe, and has a chrysler emblem on it

daves70 · « **Reply #2 on:** April 24, 2008 - 09:28:54 PM »

Thanks!

cudadave72 · « **Reply #3 on:** April 24, 2008 - 09:38:28 PM »

It has the Chrysler emblem on it and the part# is 4039FX4 or so that is what I see on the back of my original one. Hope that helps!

Moparal · « **Reply #4 on:** April 24, 2008 - 09:40:17 PM »

It has the Chysler emblem on it and the part# is 4039FX4 or so that is what I see on the back of my original one. Hope that helps!

I think the 4 numbers are like cordoba/ lil red yr models magnum and stuff. 3 was like charger

cudadave72 · « **Reply #5 on:** April 24, 2008 - 09:43:54 PM »

I think the 4 numbers are like cordoba/ lil red yr models magnum and stuff. 3 was like charger

Are they the same wheel or are there differences?

Moparal · « **Reply #6 on:** April 24, 2008 - 09:45:46 PM »

I have never noticed a difference, but I am not a guru either. dusters had them too, may be a dodge/plymouth issue

Alaskan_TA · « **Reply #7 on:** April 24, 2008 - 09:47:22 PM »

4039 is the number from the 1970 parts book. It was A & B-body only.

DoNotChallengeHer · « **Reply #8 on:** April 24, 2008 - 10:17:12 PM »

Shelby's Super Coupe had a Tuff Wheel.

Alaskan_TA · « **Reply #9 on:** April 24, 2008 - 10:40:14 PM »

They were used on F bodies, trucks & maybe others in later (post E-Body) years.

I do not know if the number changed though?

DoNotChallengeHer · « **Reply #10 on:** April 24, 2008 - 10:45:21 PM »

They were used on F bodies, trucks & maybe others in later (post E-Body) years.

I do not know if the number changed though?

Thanks , Barry.