News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Hardware Question  (Read 1410 times)

    Offline MoparMan440

    • Full Member
    • ***
    • Posts: 813
    • Drive fast, take chances !
    Hardware Question
    « on: June 10, 2004 - 02:46:55 PM »
    I'm missing the bolt that goes into the coupler which connects to the steering box. Does anyone know if this is standard hardware ,a partial threaded bold or is it just a roll pin. Also any idea of where I could pick one up Year One  ? BTW it from a 72 Challenger. Thanks in advance for any help ! :)

    Gary
    Logged


    Offline MAXcuda

    • Jr. Member
    • **
    • Posts: 402
    Re: Hardware Question
    « Reply #1 on: June 10, 2004 - 05:22:08 PM »
    The part that goes through the coupler on the end of the steering shaft where it meets the steering box is just a roll pin.  Should be able to pick up a suitable one at a hardware store.
    Logged

    Offline MoparMan440

    • Full Member
    • ***
    • Posts: 813
    • Drive fast, take chances !
    Re: Hardware Question
    « Reply #2 on: June 10, 2004 - 06:32:22 PM »
    Thanks for the help ! That's what I was thinking but wasn't really sure. Thanks again ! ;D
    Logged

    Offline MAXcuda

    • Jr. Member
    • **
    • Posts: 402
    Re: Hardware Question
    « Reply #3 on: June 11, 2004 - 04:43:04 PM »
    you're welcome  :)
    Logged
    Pages: [1]
    « previous next »