Author Topic: Aftermarket magnum computer any (Read 1444 times)

1973challenger360 · « **on:** June 28, 2008 - 12:56:01 AM »

I thought i read a few years back mopar was going to make a new computer for adapting a magnum in an old car with wireing harness enough so you could put in more speed parts as stock units dont allow for much. did they ever come out and were can you get them if the did.

Bullitt- · « **Reply #1 on:** June 28, 2008 - 07:12:54 AM »

This maybe?
http://www.moparsupercenter.com/programmable-emsp5153ems.html?cat=1262

Shane · « **Reply #2 on:** July 11, 2008 - 09:07:23 PM »

This is the route I took on my 74 Challenger, 5.9/518 swap. Purchased from Hughes Engines along with modied Air Gap manifold

http://www.hughesengines.com/partDetail.asp?partID=13295

gkring · « **Reply #3 on:** July 11, 2008 - 11:16:52 PM »

Quote from: bullitt99 on June 28, 2008 - 07:12:54 AM

This maybe?
http://www.moparsupercenter.com/programmable-emsp5153ems.html?cat=1262

That setup is for the 5.7/6.1 hemi style motors. There are plenty of aftermarket computers out there, but nothing I know of under about $1500. Definitely no plug and play setups, you would have to build your own fuel maps.

Shane · « **Reply #4 on:** July 12, 2008 - 10:41:59 PM »

SCT tuners can flash 5.9 Magnum / 518 Trans PCMs

From Hughes Engines
These include all OBDII V6 & V8 Magnum trucks from 1996-to date. Including all 3.9 / 5.2 / 5.9 as well as the 5.7 & 6.1 Hemis�.
We are also able to provide tuners for all of the Hemi� cars as well.

Author Topic: Aftermarket magnum computer any (Read 1444 times)

1973challenger360

Aftermarket magnum computer any

Bullitt-

Re: Aftermarket magnum computer any

Shane

Re: Aftermarket magnum computer any

gkring

Re: Aftermarket magnum computer any

Shane

Re: Aftermarket magnum computer any