News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Having problems with an over charging system  (Read 1070 times)

    Offline myrtle

    • Jr. Member
    • **
    • Posts: 40
    Having problems with an over charging system
    « on: September 02, 2008 - 12:07:25 AM »
    I recently installed an electric water pump and fan, and now im have serious over charge issues. So far to the point that it has melted the wire going to the alt/chargeing gauge.
    Im not sure what it could be. I have already swapped out two different alternators and two different voltage regulators.

    Anyone have any ideas?

    Thanks in advance.
    Logged
    1970 GTX. #s Matching Super Track Pack


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Having problems with an over charging system
    « Reply #1 on: September 02, 2008 - 12:16:40 AM »
    you have added 15-20 amps load to the alt & all the power is going through the ammeter guage , I would add a bypass wire of 10 guage to go from the alt directly to the starter relay
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline myrtle

    • Jr. Member
    • **
    • Posts: 40
    Re: Having problems with an over charging system
    « Reply #2 on: September 02, 2008 - 05:33:43 PM »
    ignition relay or the relay for the fans and water pump?
    thanks
    Logged
    1970 GTX. #s Matching Super Track Pack

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Having problems with an over charging system
    « Reply #3 on: September 02, 2008 - 06:04:36 PM »
    the starter relay on the inner fender near the battery , conect it to the large battery connection
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »