Will not crank?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 ... 5 6 [7]

    Author Topic: Will not crank?  (Read 15265 times)

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Will not crank?
    « Reply #90 on: September 05, 2008 - 11:28:28 AM »
    Quote from: old-school on September 05, 2008 - 09:17:59 AM

    I turned the key and the starter gave a half crank and the relay just started to rapidly click.

    Put a different battery in it.   Yours is dead and will not take a jump.

    Rob
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0



    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Will not crank?
    « Reply #91 on: September 05, 2008 - 12:17:06 PM »
     :iagree:try one from one of your other cars
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline 73Chally

    • Resident
    • *****
    • Posts: 2381
    Re: Will not crank?
    « Reply #92 on: September 05, 2008 - 03:40:39 PM »
    A cell might have gone bad on you and you are only getting 10 volts.  What kind of a reading do you get with a volt meter?  With nothing turned on and the battery sitting it should be about 12.1 to 12.4 volts.  If its anything below 12 volts then try a different battery.
    Logged

    Offline old-school

    • Jr. Member
    • **
    • Posts: 139
    Re: Will not crank?
    « Reply #93 on: September 05, 2008 - 04:23:35 PM »
    I don't have a volt meter so when my wife gets home in a while i'll pull her battery and try it in my car. Man i sure hope its the battery and not the starter cause if i have to pull the starter, it's going to be a pain in the a**

    The headers will have to come out and the bolts to the headers look very very hard to get to.
    Logged

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Will not crank?
    « Reply #94 on: September 05, 2008 - 11:58:30 PM »
    I bought a cheap $15 multimeter a few years back.  It is really an indispensable tool.  Perhaps if you've got a Harbor Freight around you could pick one up.  I find that troubleshooting is much much easier when you can test for voltage and resistance. 
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline old-school

    • Jr. Member
    • **
    • Posts: 139
    Re: Will not crank?
    « Reply #95 on: September 06, 2008 - 06:28:17 PM »
    OK, we can officially close this thread! After i bought both new mopar battery cables and then then put a new battery in, it fired right up without hesitation. I want to thank everyone for all of the great advice!
    Logged

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Will not crank?
    « Reply #96 on: September 06, 2008 - 06:30:15 PM »
     :woo:

    Now what about that tach?
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline Moparal

    • Permanent Resident
    • *******
    • Posts: 13085
    Re: Will not crank?
    « Reply #97 on: September 06, 2008 - 06:45:08 PM »
     :worshippy :faint:    I feel better. And very happy for you :bananasmi :ylsuper: :wave:
    Logged
    Pages: 1 ... 5 6 [7]
    « previous next »