Anyone w/an offset leaf spring kit w/sway bar?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Anyone w/an offset leaf spring kit w/sway bar?  (Read 1709 times)

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Anyone w/an offset leaf spring kit w/sway bar?
    « on: December 20, 2008 - 05:58:24 PM »
    Thinking of getting a Dr. Diff kit that moves it inboard 1".  ANyone figure out what to do if you try to mate it w/a rear sway bar? 
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO


    Offline HP2

    • Resident
    • *****
    • Posts: 4478
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #1 on: December 20, 2008 - 06:52:46 PM »
    Use a B body sway bar. They are a tad bit narrower than an E body unit.
    Logged

    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #2 on: December 21, 2008 - 01:36:10 AM »
    The E body addco bar that attaches to the axle housing with the u bolts and the end links running to the frame will work with the mopar offset spring hangers (I know you said Dr. Diff, but the setup is probably similar). If you go with super stock springs or anything like that, make sure to increase the front sway bar and/or torsion bar size as well. Running the stock front sway bar and the add on one in the rear can create some dangerous handling tendencies with the super stock springs.
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #3 on: December 21, 2008 - 05:01:28 PM »
    Bend the bar
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #4 on: December 21, 2008 - 06:28:32 PM »
    Quote from: Chryco Psycho on December 21, 2008 - 05:01:28 PM
    Bend the bar

    Thats what I did to the e-body bar with my b-body rear set up.
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline ragtopdodge

    • Resident
    • *****
    • Posts: 4065
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #5 on: December 21, 2008 - 08:23:32 PM »
    YOu used a torch?
    Logged
    '70 318-auto Chally 'vert
    '71 383-auto 'Cuda 'vert (sold)
    06 300c SRT8
    04 2500 QCLB 4x4 HO

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #6 on: December 21, 2008 - 08:27:52 PM »
    me :nono:  I had someone use a press at a local shop.
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #7 on: December 21, 2008 - 09:09:43 PM »
    I stuck it into the trailer hitch on my truck & pulled like heck ,don`t use heat
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline miketyler

    • Resident
    • *****
    • Posts: 2561
      • www.miketyler.net
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #8 on: December 25, 2008 - 08:16:47 AM »
    good question - let me know what you figure out. I am in the same boat. I thought someone here had redrilled the lower attach brackets. The end links still are pointed slightly inward using this solution I think. Would this be a big deal and/or affect functionality?
    Logged
    72' Cuda restomod
    70 Mustang Mach 1
    07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
    01' Honda 1100 Shadow Sabre
    96' Seadoo Challenger

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #9 on: December 25, 2008 - 02:44:13 PM »
    I think Rob redrilled the mounts on his , definatly will not affect function as long as the links are not angled too far & damage the bushings
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #10 on: January 02, 2009 - 10:56:23 AM »
    Quote from: Chryco Psycho on December 25, 2008 - 02:44:13 PM
    I think Rob redrilled the mounts on his , definatly will not affect function as long as the links are not angled too far & damage the bushings


    Sorry I'm late on this; too many new threads and topics to accidentally find my name on.

    I took my factory sway bar plate and sliced the side support a couple of inches on the side that I wanted to move. I bent it outward, creating a gap.  I then welded in a flat piece of steel to fill the opening and welded it on both sides.  I then drilled a new hole, then snuck up on it's final size, with a die grinder.

    I will be making another set for my 2nd challenger sometime soon, so I'll take some pics for my resto-thread.

    Rob



    « Last Edit: January 02, 2009 - 01:54:12 PM by shelbydogg »
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline Katfish

    • Resident
    • *****
    • Posts: 3733
    • 70 Challenger
    Re: Anyone w/an offset leaf spring kit w/sway bar?
    « Reply #11 on: January 02, 2009 - 11:02:30 AM »
    Quote from: thedodgeboys on December 21, 2008 - 08:27:52 PM
    me :nono:  I had someone use a press at a local shop.

    I have the Dr Diff 1" kit.  I'd like to have the sway bar bent.  How much did it cost, and how did you know how much to bend it.  1" per side?

    As it stands, my factory bar is installed to the factory spots, just moved in 1" per side now.

    Seems like 1 of the manufacturers would make something up?
    Logged
    Pages: [1]
    « previous next »