mics hardware & gaskets needed.

[RUSTY Cuda]

I know you guys posted the link for the rally mirror gaskets before, of course now I can't find it, thats the first item I need .
On a 73 cuda the scoop inserts are held on by 2 speed nuts & 2 very odd philips head screws, that go into rubber grommets with a threaded piece in the back, I need 2 sets of each, 8 screws & 8 grommets.
Lastly I need the speed nuts for the smaller emblems, for some rason all the ones I removed & cleaned up are way big, won't grip the studs. they are 5/16th heads, could use at least a dozen.
Any help appreciated!
A quick question, put on my 'Cuda 360 emblems & only got a speed nut on the front stud, the rears one is under the inner frame, how the He.....LL do you get the rear ones on???  Thanks  Rich!

[Bullitt-]

R/T's got you covered

http://www.rtspecialties.net/proddetail.asp?prod=3035005


http://www.rtspecialties.net/proddetail.asp?prod=3035005


For the Hood callouts you need barrel nuts....PM your address & I'll mail you some.

[RUSTY Cuda]

Thank you, info pm'd to you.
Any leads on those grommets & screws for the scoop inserts.
Going to order the mirror gaskets now, will see if they list that hardware for the scoop inserts while I'm there? Rich

[RUSTY Cuda]

Ok, they had the hardware for the scoop inserts, so they & the miror gaskets are ordered, maybe now I can finish up the hood! YEA! thanks again,Rich.