News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 4x4 tranny  (Read 1328 times)

    Offline 1973challenger360

    • Resident
    • *****
    • Posts: 2385
    4x4 tranny
    « on: May 06, 2004 - 09:55:32 PM »
    by any chance can the tail shaft be switch with an auto from a 2x4 tranny, for the transfer case.   if not can any parts be used the 727 is rebuilt ?
    Logged
    1965 barracuda. Was 273/2 904 car had 440 360 in plans
    1996 Dodge 1500 ST 5.2 Np3500 4x2 club cab short bed

    2008 Veracruz AWD Limited     I pay she drives


    Offline DodgeFreak

    • Sr. Member
    • ****
    • Posts: 1887
    • Cars and trucks are my friends..
    Re:4x4 tranny
    « Reply #1 on: May 06, 2004 - 11:32:08 PM »
    i'm wanting to say that the internal shaft is shorter...so you would have to tear into the tranny...but not sure...chryco might know..
    Logged
    74 Plymouth Duster- restoring

    77 Dodge D150 shortbox- as long as i don't change my mind will be a step side dually diesel or a 383 powered truck

    04 durango 4.7

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re:4x4 tranny
    « Reply #2 on: May 07, 2004 - 12:07:20 AM »
    the 2wd drive tranny has a longer tailshaft then the 4X4 version , virtually all parts will interchange between the 2wd & 4X4 except the tailshaft & rear housing though assuming both are the same model tranny 727  or 518 etc  
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »