Author Topic: 70 Challenger Convertible Rear Interior Panels?  (Read 978 times)

Offline filmsurgeon

  • Full Member
  • ***
  • Posts: 594
  • Resto-Mod '70 Convertible Challenger
70 Challenger Convertible Rear Interior Panels?
« on: September 10, 2008 - 04:17:13 AM »
Looking for original, good condition 1970 Challenger convertible rear interior panels.  Prefer manual window, but could work with power window type.  Color not important.
1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.




Offline filmsurgeon

  • Full Member
  • ***
  • Posts: 594
  • Resto-Mod '70 Convertible Challenger
Re: 70 Challenger Convertible Rear Interior Panels?
« Reply #1 on: January 19, 2009 - 11:19:08 PM »
Still looking for these. If anyone can help, it would be much appreciated. Thanx
1970 Challenger Convertible (JH27N0B); Resto-Mod; 605 HP, 412cid Small Block; Holley 750CFM Carburetor; A-833 23-spline 4-SPD; A-body 8.75 rear-end w/3.55 gears; 3" mini-tub; leaf spring relocation kit with split-leaf mono and Caltracs; American Racing AR500 Wheels, Rears = 15x10 (5.5" BS) with 315/60-15 BFG Comp T/A Drag Radials; Fronts = 15x7 (3.5" BS) with 215/70-15 BFG Radial T/A Radials.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 70 Challenger Convertible Rear Interior Panels?
« Reply #2 on: January 20, 2009 - 01:34:13 AM »
these are one of the most expensive & hard to find parts to get .
 I have seen them at over $1500 for a pair , most were cut for speakers , any non black panels the vinyl has deteriorated causing the chalking / disintegration of the grain , reproductions are probably the best bet 

Challenger - You`ll wish You Hadn`t

Offline beaparts

  • Jr. Member
  • **
  • Posts: 42
Re: 70 Challenger Convertible Rear Interior Panels?
« Reply #3 on: January 21, 2009 - 04:41:11 PM »
Still looking for these. If anyone can help, it would be much appreciated. Thanx


Call me I have rear panels.  Don't buy the repops, they fit terrible and the top hits the inside edge when it goes down (at least it did on a cuda).  Don't ask how I know that.

Michael C. Ross - Owner
B/E & A Restoration Parts, Inc.
330-725-3990

Offline VTMopar

  • Sr. Member
  • ****
  • Posts: 1056
  • '70 Challenger Convertible, '74 Challenger Rallye,
Re: 70 Challenger Convertible Rear Interior Panels?
« Reply #4 on: January 21, 2009 - 09:01:38 PM »
I thought I just saw a set on Ebay ....... do a search... I think they started off at $100.00

Nice Vert!

VT Mopar
VT MOPAR

Offline 426 pentastar

  • Jr. Member
  • **
  • Posts: 175
Re: 70 Challenger Convertible Rear Interior Panels?
« Reply #5 on: February 03, 2009 - 03:48:08 PM »
The repops dont fit bad you just have to fit them two or three times and might have to trime them a bit.Good used ones are not cheap and then your taking a chance on the plastic being really dry so once the sun hits them for any length of time they will start to chark and flake.

Offline wiging19

  • Full Member
  • ***
  • Posts: 601
Re: 70 Challenger Convertible Rear Interior Panels?
« Reply #6 on: February 03, 2009 - 04:24:17 PM »
The black ones last the best.  The color ones seem to chalk up.  Mine where white and man did they get chalky.   I had a couple of sets back in 97 but a helpful mopar expert relieved me of them for a few bucks.  I no longer buy anything from this person for obvious reasons. :ebay: