Author Topic: Steering wheel to close  (Read 1698 times)

Offline plumbeeper

  • Sponsor
  • Jr. Member
  • ***
  • Posts: 233
    • WOODGRAINWHEELS.COM
Re: Steering wheel to close
« Reply #15 on: February 07, 2009 - 12:06:01 PM »
You need one of these... It's the steering column adapter to put a rimblow, Tuff Wheel, E-body standard woodgrain or 72-74 E-body 2-spoke wheel on. It was used on 70-71 A and B-bodies and anything a Tuff Wheel was on. They are a couple inches shorter than the ribbed version you have. The downside is some people don't like the steering wheel so close to the dash. Let me know if you need, I have a few left.
Dave






Offline shatar4

  • Full Member
  • ***
  • Posts: 694
  • 71 Challenger
Re: Steering wheel to close
« Reply #16 on: February 07, 2009 - 02:03:54 PM »
I could use one of those if you could PM me  on the price and shipping. Thanks Dave :ylsuper:
1971 Triple black 340 Challenger

Offline Grancoupe

  • Full Member
  • ***
  • Posts: 830
Re: Steering wheel to close
« Reply #17 on: February 07, 2009 - 04:23:27 PM »
A guy I know cut a section out of the can and re-welded it. It looks exactly they same now but just a little shorter.
I did the same thing. Just puts your hands a little close to the edge of the dash pad but gave me the room I needed. Now the wheel doesn't feel like its in my chest. Sectioned out a portion and welded the two halves back together. Tig welded. Never had anyone notice it.