Compression test numbers

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Compression test numbers  (Read 920 times)

    Offline 67vertman

    • Sr. Resident
    • ******
    • Posts: 5125
    • Member since 9-23-2005
    Compression test numbers
    « on: March 08, 2009 - 05:59:05 PM »
    I performed the compression test today.  Stock 1970, 318.
    I ran the test twice on each cylinder, dry both times except the # 5 cylinder, ran it dry then wet.
    Cylinder #
    8, 150 – 152 psi
    6, 140 – 144
    4, 135 – 145
    2, 148 – 140
    7, 140 – 145
    5, 80 – 80 Dry, 95 – 100 wet
    3, 145 – 142
    1, 138 – 140

    The motor has set for six years.  I think the number 5 cylinder is rings.

    How do the numbers look?
    Logged



    Ron - Born and raised in Southern California

    I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

    First car -1969 Road Runner 383 4sp

    Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Compression test numbers
    « Reply #1 on: March 08, 2009 - 08:32:30 PM »
    looks great except for # 5 , probably both rings & heads , the rings would bump the compression higher with oil generally
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 6packCuda

    • Sr. Member
    • ****
    • Posts: 1932
    • Eagle, NE... Member since 11/17/06
    Re: Compression test numbers
    « Reply #2 on: March 08, 2009 - 09:07:19 PM »
    I would do a cylinder leakage test on #5. That will help to pinpoint the problem with that cylinder.
    Logged
    Dave

    Offline 67vertman

    • Sr. Resident
    • ******
    • Posts: 5125
    • Member since 9-23-2005
    Re: Compression test numbers
    « Reply #3 on: March 08, 2009 - 10:57:51 PM »
    Quote from: 6packCuda on March 08, 2009 - 09:07:19 PM
    I would do a cylinder leakage test on #5. That will help to pinpoint the problem with that cylinder.

    I was thinking the same thing.  :2thumbs:

    All though it means I will have to buy a new tool.   :jumping:  Don't tell the wife though
    Logged



    Ron - Born and raised in Southern California

    I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

    First car -1969 Road Runner 383 4sp

    Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

    Offline 71chally416

    • Resident
    • *****
    • Posts: 3170
      • The Streetwalker
    Re: Compression test numbers
    « Reply #4 on: March 08, 2009 - 11:38:54 PM »
    Sounds like a burnt exhaust valve to me. That's common with a high mileage SBM motor. Could also be a cylinder with some scoring or just the rings are siezed on that piston from sitting for 6 years. Might wanna try some penetrating oil in that one hole over night than run it for a few hours and see if the compression changes. The other cylinders are good for such an old motor.
    Logged
    Once we had Ronald Reagan, Bob Hope & Johnny Cash. Now we have Obama, No Hope and No Cash!

    Offline femtnmax

    • Full Member
    • ***
    • Posts: 997
    Re: Compression test numbers
    « Reply #5 on: March 09, 2009 - 12:15:45 AM »
     :iagree:
    The numbers didn't seem to come up enough for bad rings.  I could be wrong.
    If your on a budget, you could pull the head(s) and hand lap the valves (replace one?) so the compression comes up even on all holes, but not enough to overpressure the tired rings which would cause increased oil consumption.  With new valve stem seals could have it running for under $100.... But the plastic timing chain gear on the cam...or.... would be next.....
    Logged
    Phil

    Offline 72bluNblu

    • Sr. Member
    • ****
    • Posts: 1836
    Re: Compression test numbers
    « Reply #6 on: March 09, 2009 - 03:19:44 AM »
     :iagree:

    #5 is a valve issue, not rings. In my experience most bad rings will come up to almost normal compression levels with some oil down the cylinder, unless the rings are completely shot. It may not even be a burnt valve, could just be carbon build up on the back of the valve. It might also just be a stuck valve if its been sitting that long, any valvetrain noise?
    Logged

    Offline 67vertman

    • Sr. Resident
    • ******
    • Posts: 5125
    • Member since 9-23-2005
    Re: Compression test numbers
    « Reply #7 on: March 09, 2009 - 12:55:16 PM »
    Thanks for the input guys.

    I only let it warm up for about fifteen minutes before I did the compression test.  So, I am going to run it up to temperature a couple of times and retest it again and see what happens.  I am not planning on running this motor much right now anyhow.
    Logged



    Ron - Born and raised in Southern California

    I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

    First car -1969 Road Runner 383 4sp

    Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)
    Pages: [1]
    « previous next »