Author Topic: is this correct for a 70 Challenger (Read 826 times)

Tropicalcats · « **on:** April 05, 2009 - 01:37:08 PM »

Is this jack set up correct for a 70 Challenger.

Jack hook
2931102
A10961

Stand
A B

Mast
A

Alaskan_TA · « **Reply #1 on:** April 05, 2009 - 01:44:27 PM »

Looks like it except for the lug wrench. What is the date code on the jack assembly? It can be on the body or the end of one of the rivets.

Tropicalcats · « **Reply #2 on:** April 05, 2009 - 01:50:50 PM »

Looks like it except for the lug wrench. What is the date code on the jack assembly? It can be on the body or the end of one of the rivets.

I don't see a date code on the assembly. Just a pat pending number and other pat numbers.
I'll look again

Tropicalcats · « **Reply #3 on:** April 05, 2009 - 01:57:11 PM »

All I see is an A.

What would the lug wrench look like?

Alaskan_TA · « **Reply #4 on:** April 05, 2009 - 01:58:14 PM »

Examples of the date codes here;

http://www.hamtramck-historical.com/dateCodes101.shtml

I have seen one from a 1968 car that did not have one.

Back in a sec....

Alaskan_TA · « **Reply #5 on:** April 05, 2009 - 01:59:28 PM »

Tropicalcats · « **Reply #6 on:** April 05, 2009 - 02:09:22 PM »

I see the rivet it should be on but its just circles. Could it be correct but not date coded?

Alaskan_TA · « **Reply #7 on:** April 05, 2009 - 02:11:39 PM »

Did you see the one with the date stamp on the body vs. the rivet?

Every jack I have seen from 1969-1971 has had a date code.

Tropicalcats · « **Reply #8 on:** April 05, 2009 - 02:32:51 PM »

I see nothing.