Author Topic: challenger bumper question  (Read 1984 times)

Offline chaps70rt

  • Full Member
  • ***
  • Posts: 613
  • 70 Challenger R/T Hardtop in Progress (Canada)
Re: challenger bumper question
« Reply #15 on: March 08, 2009 - 06:05:50 PM »
Just to clarify ..... is this the 3" piece that sits below the tail lights and is attached to the rear of the car and fits under the top edge of the bumper??  I presume that this is to stop road grime/water from coming up between the bumper and rear tail lights.

IF SO ..... I am interested to know how this should be mounted.  I just bought one for my 70 Challenger and am unsure of the installation .... weld .... bolt?

Anyone been through this already?      My suspicion is that it should be body color.

Thanks .... CHAPS70RT
White 1970 Challenger R/T
440 - 4BBL - Shaker
Daily Driver - 2014 Dodge RAM 1500
Stouffville, Ontario Canada




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: challenger bumper question
« Reply #16 on: March 08, 2009 - 09:34:20 PM »
on a 70 it wasn`t 3 " wide as I recall , I would paint it body color unless you are doing the rear balckout like the T/A has, then it would be flat black

Challenger - You`ll wish You Hadn`t

Offline chaps70rt

  • Full Member
  • ***
  • Posts: 613
  • 70 Challenger R/T Hardtop in Progress (Canada)
Re: challenger bumper question
« Reply #17 on: April 05, 2009 - 08:22:28 AM »
You are correct.   It is not 3", but closer to 2".   

No one has chimed in on the installation.  I checked the service manual and there are no close up drawings.   I will check the 1970 Dealer reference books.   If anyone knows how these were installed from the factory and where, I would greatly appreciate the advise.    Cheers ....
White 1970 Challenger R/T
440 - 4BBL - Shaker
Daily Driver - 2014 Dodge RAM 1500
Stouffville, Ontario Canada

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: challenger bumper question
« Reply #18 on: April 05, 2009 - 10:26:49 AM »
My '73 is/was argent.

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com


Offline chaps70rt

  • Full Member
  • ***
  • Posts: 613
  • 70 Challenger R/T Hardtop in Progress (Canada)
Re: challenger bumper question
« Reply #19 on: April 06, 2009 - 07:35:39 AM »
Thanks again guys .....     Still looking for installation instructions if anyone has them.
White 1970 Challenger R/T
440 - 4BBL - Shaker
Daily Driver - 2014 Dodge RAM 1500
Stouffville, Ontario Canada

Offline nick68

  • Jr. Member
  • **
  • Posts: 135
Re: challenger bumper question
« Reply #20 on: April 08, 2009 - 01:08:44 PM »
I have a '72 340 ralley that was very original till i started restoring it. The strip you are inquiring about installs with small phillip head screws. I think there are something like 10 or so. The go in from underneath .Black is the color of my strip.
"Did I mention I hate sanding ? "

Offline rallye73

  • Jr. Member
  • **
  • Posts: 351
  • Model cars for the big boys!!
Re: challenger bumper question
« Reply #21 on: April 12, 2009 - 09:34:01 PM »
I'm changing the bumpers on my 73 to the earlier style, and need pics on the filler panel installed. Surely someone out there has pics. I think I know where it goes, but I wanna be sure before I start drilling holes.
John Moorman
1971 Challenger R/T 383 4 speed (waiting it's turn)
1973 Challenger Rallye 340 4 speed (undergoing full resto)
2003 Dodge SRT-4 Stage 3 turbo daily driver-been as fast as 11.97et
1995 Dodge Neon Sport Coupe DOHC 5 speed Nitro-yellow-green (one of 527 built)

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: challenger bumper question
« Reply #22 on: April 13, 2009 - 01:43:11 AM »
I pulled the strip you are talking about off a 70 tailpanel I bought and cut off the car. It was put on with phillips head metal screws like mentioned before. It did not come off willingly which leads me to believe there might have been seam sealer or something underneath it. That or it just had a thick coating of paint. It was body color btw.
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*