When I press and release my brake pedal, the pedal comes back most of the way, but stays down far enough that the brake lights remain on. If I reach down and pull on the pedal, it'll move back another 1/2" or so and the lights shut off. Couple of questions:
1. Brake Switch appears to move quite a bit. I have a parts store replacement that is going in this weekend. Should the body of the switch move at all?
2. The fact that I can pull the brake pedal back disturbs me a little. It was a manual drum-drum car and has been changed to a manual disc-disc car. Is my pushrod now too short with the change in master cylinders?
