E-Body Brakes on B-Body?

[Carlwalski]

Will E-body (71 'Cuda) factory disc brakes (front and/or rear) fit a 2nd Gen Charger?
Will they ave the same bolt pattern and hubs?



Thanks

[Chryco Psycho]

only if you swap the entire spindle
 The rears bolt onto the end of the axles n prob
 same bolt pattern for both

[Carlwalski]

Thanks Neil. 

[Chryco Psycho]

Anytime Carl 

[Carlwalski]

Hi Neil, I sold the Cuda and had to cut a deal on the spot so most of the parts had to go with it, including the spindles. I can just go buy some Cuda spindles and out them on the Charger, right? I found these on eBay, not sure how good they are but they do look decent. Any input is appreciated.

http://cgi.ebay.com/ebaymotors/MOPAR-B-E-BODY-STOCK-SPINDLE-pair-dodge-plymouth-cuda_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ33583QQihZ007QQitemZ170321613241QQrdZ1QQsspagenameZWD1V


Thanks.

[HP2]

They don't say if they are big bearing or small bearing, nor what size rotor the brackets are for.

I've got a set of stock, big bearing spindles with the stock 11.75 silder style caliper adapters. You can have them for $150 plus shipping. Granted they aren't as shiny as those, but they are good factory forgings. Drop me a note if your interested. highplains@comcast.net

TC

[Carlwalski]

Thanks TC, I just got an email from Dr Diff about another order so will check what he has first. If he hasn't got anything (he made my original Cuda disc brake kit) but if he hasn't I'll definitely hit you up for those spindles. Thanks a heap.