Author Topic: Painting Engine Compartment  (Read 875 times)

Offline quapman

  • Resident
  • *****
  • Posts: 2350
    • Auto-Grip on Facebook
Painting Engine Compartment
« on: May 17, 2009 - 11:50:48 AM »
I'm going to attempt to paint my engine compartment.

Should I go single-stage acrylic or Base/Clear?

The car is going to be a driver, so "show quality" is not a must and YES,  I'm on a tight budget.

Thanks
My name is Steve and I'm addicted to Challengers...





Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Painting Engine Compartment
« Reply #1 on: May 17, 2009 - 12:31:21 PM »
I used a SS Omni and did it myself.  I think about 75 for everything(paint, hardener, reducer, etc), I bought a nice Charcoal Filter mask and a teflon paint suit too.

Tom




Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Painting Engine Compartment
« Reply #2 on: May 17, 2009 - 07:17:14 PM »
Nice,
Nothing like a fresh engine compartment.  Looks good Tom.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline Travis72

  • Full Member
  • ***
  • Posts: 894
Re: Painting Engine Compartment
« Reply #3 on: May 18, 2009 - 01:56:21 AM »
When you go to paint the rest of the car are you going to do SS or base/clear?  When I debated the same question, most of the feedback I got said paint it however you're going to do the rest of the car.  That way you won't be able to tell the difference.

If you're on a tight budget, I would image that SS would be cheaper just because it's one less thing to buy.

Travis
72 Cuda

Offline heminut

  • Resident
  • *****
  • Posts: 2023
  • owner of the poor man's Hemi Cuda
Re: Painting Engine Compartment
« Reply #4 on: May 18, 2009 - 01:32:29 PM »
I used single stage in my engine compartment, and it's holding up well. The color is a little off from the BC/CC I used on the body.
1970 5.7 Hemi Cuda

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Painting Engine Compartment
« Reply #5 on: May 18, 2009 - 03:23:08 PM »
I used single stage in my engine compartment, and it's holding up well. The color is a little off from the BC/CC I used on the body.

Mine is just a bit off as well, but I can touch it up very easily.

Tom

 
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline heminut

  • Resident
  • *****
  • Posts: 2023
  • owner of the poor man's Hemi Cuda
Re: Painting Engine Compartment
« Reply #6 on: May 19, 2009 - 10:37:59 AM »
Mine is just a bit off as well, but I can touch it up very easily.

Tom
:iagree: That's one of the reasons I went with the single stage too!
1970 5.7 Hemi Cuda