Author Topic: Firewall Vent Grill Screw Type (Read 613 times)

cwestra · « **on:** June 07, 2009 - 09:04:34 PM »

Does anyone have a picture of what the screw looks like that secures the plastic vent grills under the hood of a 70 Cuda?

Alaskan_TA · « **Reply #1 on:** June 07, 2009 - 09:08:01 PM »

They may be phillips or hex head, both types were used.

Alaskan_TA · « **Reply #2 on:** June 07, 2009 - 09:11:48 PM »

Picture of originals, the hex variety seems to be more common on cars I have looked at so far;

cwestra · « **Reply #3 on:** June 07, 2009 - 09:37:45 PM »

Picture of originals, the hex variety seems to be more common on cars I have looked at so far;

Perfect. Thanks. Now I just need to figure out where I put them.

67vertman · « **Reply #4 on:** June 07, 2009 - 11:13:45 PM »

My 70 has hex head screws as well.

heminut · « **Reply #5 on:** June 08, 2009 - 12:27:16 PM »

Both of my 70's had (have) the phillips screws. The screws also have a shoulder on them so you don't overtitghten them and crush the plastic.

FY1Cuda · « **Reply #6 on:** June 08, 2009 - 09:06:41 PM »

Both our '70 cars have phillips screws. R/T Specialties shows hex-head for '71
http://www.rtspecialties.net/products.asp?cat=10&pg=8