Author Topic: Another Mopar nut...  (Read 1654 times)

Offline danmc77

  • Jr. Member
  • **
  • Posts: 41
Another Mopar nut...
« on: July 16, 2009 - 08:40:30 AM »
 :smokin:

Hi guys - new to the site, but frequent poster on some other Mopar forums.  I've hear a lot about this place, so I wanted to join the fun!

My Dad bought his first car - 1968 Charger - when it was new.  Well, after the early eighties, the car was parked, and basically sat throughout my entire childhood.  When I graduated high school in '95, my Dad sent it out to have the body worked and painted.  After that, it sat in the driveway unfinished.  i finally decided to take on the project myself.  Other than the paint, I restored the entire vehicle - engine, suspension, interior, trim, modifications, etc.  After running for a few years and less than a few thousand miles, I decided to re-build the motor with some more power :grinyes: Now it's 10.5:1 CR, Alluminum heads, Big carb, bigger cam from Hughes, roller rockers, etc. - should net me around 525hp or so at the crank.  I'm just now wrapping that up and should be driving her again within the next few weeks.

I forgot to mention - when I graduated in '95, I also bought my first car - 69 Superbee.  Older resto, but the car was in real nice shape.  After 2 years, I was forced to sell, but I vowed to by another when I bought my first house - and that's exactly what I did.  I drove up to Michigan to pick up my second Superbee not more than a month or so into owning a new house (about 5 years ago).  That Bee is still a project.

I have since moved into my second home, and aquired a couple more cars - a 71 Demon, and a 73 Barracuda.  Both are projects.  The Cuda will get a nicely worked 340, while the Demon will get a hot 360 - both in the 500hp range.

I also have a 68 Dart on the side of my house that was supposed to be a big block project, but I just sold it this month, and the guy is picking it up in the next few weeks - sorry, had to fund the Edelbrock heads and Demon carb for my Charger.

Here's a pic of the Charger - granted, it hasn't been washed in over a year, and my garage is a complete mess, but it'll give you an idea:



Well, that's  breif history of my Mopar obsession - you'll be seeing more of me.

Thanks!

« Last Edit: July 16, 2009 - 08:54:29 AM by danmc77 »
68 Charger
73 Cuda
69 Superbee
71 Demon




Offline Oldschool

  • Administrator
  • Permanent Resident
  • *****
  • Posts: 13195
  • Member Since 9-05-06
Re: Another Mopar nut...
« Reply #1 on: July 16, 2009 - 10:09:44 AM »
Nice story and cool cars....    :2thumbs:   Welcome aboard....    :cheers:   
Ken  --  In Georgia

MOPAR-------"Built To Run------Here To Stay"

Offline dmk67

  • Jr. Member
  • **
  • Posts: 126
Re: Another Mopar nut...
« Reply #2 on: July 16, 2009 - 10:20:58 AM »
WELCOME ABOARD !!!!! the best sight on the net.cool cars we love pics.Will the charger be finished soon?

Offline 70shaker6pk

  • Jr. Member
  • **
  • Posts: 178
Re: Another Mopar nut...
« Reply #3 on: July 16, 2009 - 11:40:06 AM »
Sure looks nice!
'JS23V0B'  1970 Challenger R/T N96 440 Six Pack

Offline 426HEMI

  • Sr. Resident
  • ******
  • Posts: 5187
  • My M46 Barracuda! Member Since:October 01, 2005
Re: Another Mopar nut...
« Reply #4 on: July 16, 2009 - 12:26:36 PM »
"Welcome aboard and I know you will enjoy this site and the other mopar nuts.    :bigsmile:
Got a pretty good start on my M46 optioned Barracuda restoration but now it is on hold till I can gather more funds.  Still need a few parts for it.  SIU Graduate 75 AAS Automotive Tech, 94 BS Advanced Tech Studies, 1997 MSED Workforce Education and Development

1970 M46 Barracuda
1998 Dodge Darango

Gordon

Offline danmc77

  • Jr. Member
  • **
  • Posts: 41
Re: Another Mopar nut...
« Reply #5 on: July 16, 2009 - 02:46:09 PM »
Thanks guys!!

The Charger should be back on the road in the next couple weeks.  It was running fine, but I had a couple electrical gremlins about a year and a half ago (all Year One repro harnessses - go figure), so I parked it and ripped the dash and engine harness out to repair.

Since then, I decided to get rid of the old magnum 500 rims and redline repro tires and replace them with nice polished, bigger, rims and radial T/As.  I also swapped in vented/slotted disc brakes up front with a Scarebird conversion setup, new master cylinder, FirmFeel front and rear sway bars, sub frame connectors, rear wheel cylinders, 3" flowmaster exhaust, headers, new top end including eddy heads w/ 75cc chambers, Comp roller rockers, Comp hi-tech pushrods, Hughes springs and cam, Demon 850 carb, late-model internally regulated alternator w/ higher output, re-routed the charging system away from the dash harness (using the starter relay as the main BUS), Mallory Unilite dist, Mallory 6AL, Restored the grille, converted to real HID head lights with new H4 housings, Etc, etc, etc.

So basically, the electrical gremlin turned into a complete remod that has lasted the last 1 1/2 years.  Can't wait to get it out of the garage and wash, polish, and wax her.

The Demon is my next project - should be working on it by late August.
The Bee is next, and the Cuda is in my bro's garage right now disassembled.  My brother and I both own the Cuda, so he's working on it right now, and hopefully it will be done in a year or so.  It''l be a Cuda clone - it was an original 318 car, auto w/ console.   
68 Charger
73 Cuda
69 Superbee
71 Demon

Offline moparmaniac59

  • Resident
  • *****
  • Posts: 3772
  • Drive it like ya stole it!
Re: Another Mopar nut...
« Reply #6 on: July 16, 2009 - 06:08:22 PM »
Welcome to the site!! Great story to a great car. Glad it's still in the family! Looks very nice. Keep us posted. I'd love to see some more pics maybe of the interior. We luv pictures here!!


                                              Matt B.
Matt

Offline NoMope Greg

  • Resident
  • *****
  • Posts: 3166
Re: Another Mopar nut...
« Reply #7 on: July 16, 2009 - 07:28:50 PM »
Welcome to the site.  We like B-bodies too.  :2thumbs:
Greg
2003 Ford Escape XLS
Currently Mopar-less :(

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Another Mopar nut...
« Reply #8 on: July 16, 2009 - 09:54:41 PM »
Very Nice, glad to have you!

Tom :2thumbs:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline hooD

  • detroit iron
  • Resident
  • *****
  • Posts: 2820
  • Motor City Made Muscle
Re: Another Mopar nut...
« Reply #9 on: July 17, 2009 - 01:11:40 AM »
 :2thumbs:  Welcome to the forum.  You have a nice collection of Mopars.  Have any more pictures to share?
-Larry
member since AUG 2007
http://www.youtube.com/watch?v=NvrWiLgDm7Y

southeastern michigan usa
             
 
            
1973 'CUDA 340
 
original owner
37,117 miles
  
:grinyes: *click my E-Body* :grinyes:

Offline BIGSHCLUNK

  • Sr. Resident
  • ******
  • Posts: 9341
  • Miss NIKKI - were you this hot at 48?
Re: Another Mopar nut...
« Reply #10 on: July 17, 2009 - 08:34:29 AM »
Cool story. Welcome,  :cheers:
70 Chally R/T Convertible- Yes she's really got a HEMI, no she's not a Charger!
                                             [o o o o]
                                                  OO
                                                  OO 
                                              [o o o o]
https://www.aanddtruckautoparts.com/
http://www.facebook.com/pages/A-D-Truck-and-Auto-Parts/67427352555?ref=hl

Offline danmc77

  • Jr. Member
  • **
  • Posts: 41
Re: Another Mopar nut...
« Reply #11 on: July 17, 2009 - 08:59:29 AM »
:2thumbs:  Welcome to the forum.  You have a nice collection of Mopars.  Have any more pictures to share?
Thanks - I'll have to take more pics.  However, the rest are projects, so not all that impressive right now.  Either way, I'll get some more pics to post.
68 Charger
73 Cuda
69 Superbee
71 Demon