Author Topic: Passenger side , rear lower than driver side......  (Read 3242 times)

Offline 72cudamaan

  • Resident
  • *****
  • Posts: 3248
Re: Passenger side , rear lower than driver side......
« Reply #15 on: August 14, 2009 - 11:29:12 PM »
You dont have to be level to take your measurements, just flat. Well OK, a real steep grade could be a problem but as long as your car is sitting on a flat surface your measurements wont be affected.
If I cant fix it, it's broke
 
Andy  (phukker whither)




Offline shadango

  • Resident
  • *****
  • Posts: 3920
Re: Passenger side , rear lower than driver side......
« Reply #16 on: August 16, 2009 - 09:05:12 AM »
I got under there and looked and realized that the snubbers in the front were WAAAAAY too close to hitting at rest....so I raised the left side back up the 1.5 turns I had dropped her, plus added another half turn, and raised the right side 2.5 turns......The front end seems to measure equally now.....took it for a ride and the ride is definately improved since I am not smacking teh snubbers over every bump! :scared:

The rear, though, still sags on the right side.

So I guess a set of new springs, add-a-leafs or air shocks are in my future.  I know the consensus here is that air shocks are not the cure. But would they work OK until I could get new springs or add-a-leafs?  I have never pulled rear springs or pulled apart a spring pack before and am a bit ...well.....spooked by it...LOL